Panasonic KXTG6411 Expand Digital Phone - Multi Language - Page 23

Programming Feature Play new msg. (msg.: messages) Pre-recorded (Reset to pre-recorded greeting) Record greeting Recording time Remote code Ring count Voice prompt (Change language) Feature code {3}{2}{3} {3}{0}{4} {3}{0}{2} {3}{0}{5} {3}{0}{6} {2}{1}{1} {1}{1}{2} Setting code - - System Page setting*1 - 33 r 32 - r 32 {1}: 1min {2}: 2min r 36 {3}: {0}: Greeting only r 33 {2}-{7}: 2-7 rings {0}: Toll saver r 35 {1}: {2}: Español r 13 *1 If "System setting" column is checked, you do not need to program the same item using another handset. *2 If you subscribe to a Caller ID service and want to view the caller's information after lifting up the handset to answer a call, turn off this feature. *3 The handset can display the Internet address where you can download the operating instructions or get further information for this product, using your computer. *4 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones. *5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers. *6 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call. *7 When the ringer volume is turned off, ~ is displayed and the handset does not ring for outside calls. However even when the ringer volume is set to off, the handset rings at the low level for alarm (page 24), intercom calls, and paging (page 39). *8 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at "700ms" unless pressing {FLASH} fails to pick up the waiting call. *9 Generally, the line mode setting should not be adjusted. If S is not displayed when another phone connected to the same line is in use, you need to change the line mode to "A". *10This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first. *11KX-TG6473 does not support Talking Caller ID feature. For assistance, please visit http://www.panasonic.com/help 23