Panasonic MCUG583 MCUG583 User Guide - Page 34

Replacing Brushes Card Carte Tarjeta E-Clip Bride en E Sujetador de E Agitator Shaft Arbre d'entraînement Eje del agitador Right End Cap Bouchon droit Tapa del extremo derecho Agitator Pulley Polea del agitador Poulie de l'agitateur Agitator Holder Soporte del agitador Support de l'agitateur Push Off Pousser Empuje hacia fuera Brush Brosse Cepillo ➢ When the bristles on the agitator are worn so that they do not touch a card held across the lower plate, the brushes should be replaced. ➢ Remove lower plate and agitator. ➢ Remove the E-clip from agitator shaft and end cap. ➢ Do not bend agitator shaft or lose Eclip. ➢ Pull agitator shaft out of agitator body. ➢ Pull, or pry out, agitator holder and agitator pulley. ➢ Push each brush out of agitator body as shown. ➢ Install new brushes by reversing procedure. ➢ Reinstall agitator holder and agitator pulley completely. ➢ Reinstall the agitator shaft, end cap and E-clip. ➢ See AGITATOR ASSEMBLY for correct assembly of parts. ➢ Position belt over agitator pulley on the agitator. ➢ Reinstall agitator and lower plate. - 34 -