Panasonic MCUG773 MCUG773 User Guide - Page 24

ROUTINE CARE OF VACUUM CLEANER, Replacing Primary HEPA Filter, Replacing Secondary Filter

Page 24 highlights

ROUTINE CARE OF VACUUM CLEANER Performing the following tasks will keep your new Panasonic vacuum cleaner operating at peak performance levels and will ensure these high levels for years to come. Check the BEFORE REQUESTING SERVICE section in this manual for recommendations on performing some of these tasks to help solve various problems that may occur. Replacing HEPA Filter HEPA Filter Filtre HEPA Filtro HEPA ➢ Check filter when installing a new dust bag. ➢ If dirty, pull filter assembly from bottom of dust compartment and replace. ➢ Place new filter in the filter support*, air flow arrow side up, in dust compartment, DO NOT CLEAN WITH WATER**. P O WER Replacing Secondary Filter ➢ Secondary filter protects the motor. ➢ Check filter assembly when installing a new dust bag. ➢ If dirty, pull filter from bottom of dust compartment. ➢ Place new filter, white side up, in filter supporter*, DO NOT CLEAN WITH WATER**. ➢ Insert filter assembly tabs into the front dust compartment slots then push down into place*. Note: * Ensure filter is fully inserted. ** Filters cannot be cleaned and should be replaced at least once each year. - 24 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

- 24 -
ROUTINE CARE OF VACUUM CLEANER
Performing the following tasks will keep your new Panasonic vacuum cleaner
operating at peak performance levels and will ensure these high levels for years to
come. Check the BEFORE REQUESTING SERVICE section in this manual for
recommendations on performing some of these tasks to help solve various
problems that may occur.
HEPA Filter
Filtre HEPA
Filtro HEPA
Replacing HEPA Filter
Replacing Secondary Filter
Note:
* Ensure filter is fully inserted.
**
Filters cannot be cleaned and should be replaced at least once each
year.
Secondary filter protects the motor
.
Check filter assembly when installing
a new dust bag
.
If dirty, pull filter from bottom of dust
compartment.
Place new filter, white side up, in
filter supporter*, DO NOT CLEAN
WITH WATER**
.
Insert filter assembly tabs into the
front dust compartment slots then
push down into place*.
Check filter when installing a new
dust bag
.
If dirty, pull filter assembly from
bottom of dust compartment and
replace
.
Place new filter in the filter support*,
air flow arrow side up, in dust
compartment, DO NOT CLEAN WITH
WATER**
.