Panasonic MCUG773 MCUG773 User Guide - Page 36

Removing Clogs, cleaner OFF and UNPLUG PO

Get Panasonic MCUG773 - UPRIGHT VACUUM - MULTI LANGUAGE PDF manuals and user guides View all Panasonic MCUG773 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Body Hose Tuyau Manguera Removing Clogs The body hose located on the back of the vacuum cleaner carries the dirt from the nozzle up to the dust bag. If the hose should become clogged: ➢ Unplug vacuum cleaner. Cover (Suction Inlet) Couvercle (entrée d'aspiration) Cubierta (Abertura de aspiración) Nozzle Hose Tuyau de tête d'aspiration Manguera de Boquilla ➢ Pull open suction inlet cover and check for clogging. Secure suction inlet cover properly after checking. ➢ Disconnect body hose from wand holder and check hose ends. ➢ Plug in vacuum cleaner and turn on. ➢ Stretch body hose in and out to remove clogs that may not be seen. Nozzle Hose Tuyau Manguera ➢ If clog still exists, turn vacuum cleaner OFF and UNPLUG POWER CORD. ➢ Remove lower plate. See: "Removing and Installing Lower Plate" Hose Inlet Entrée du tuyau Conección de manguera ➢ Inspect inlet of nozzle hose and clear any obstructions. - 36 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
- 36 -
Nozzle Hose
Tuyau
Manguera
Hose Inlet
Entr
é
e du tuyau
Conecci
ó
n de
manguera
Removing Clogs
Body Hose
Tuyau
Manguera
Cover
(Suction Inlet)
Couvercle
(entr
é
e
d
’
aspiration)
Cubierta
(Abertura de
aspiraci
ó
n)
Nozzle Hose
Tuyau de t
ê
te
d'aspiration
Manguera de
Boquilla
The body hose located on the back of
the vacuum cleaner carries the dirt from
the nozzle up to the dust bag.
If the
hose should become clogged:
➢
Unplug vacuum cleaner.
➢
Pull open suction inlet cover and
check for clogging. Secure suction
inlet cover properly after checking.
➢
Disconnect body hose from wand
holder and check hose ends.
➢
Plug in vacuum cleaner and turn on.
➢
Stretch body hose in and out to
remove clogs that may not be seen.
➢
If clog still exists, turn vacuum
cleaner OFF and UNPLUG PO
WER
CORD
.
➢
Remove lower plate.
See: “Removing
and Installing Lower Plate”
➢
Inspect inlet of nozzle hose and clear
any obstructions.