Panasonic MCV5268 MCV5268 User Guide - Page 28
REPLACING HEADLIGHT BULB, REPLACING BELT, Loop new belt Panasonic Type UB8
View all Panasonic MCV5268 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Replacing Headlight Bulb ➢ Remove lower plate. ➢ Remove bulb socket screw, grasp the bulb socket assembly and pull + upward while moving it back and forth. ➢ Remove old bulb from the bulb socket assembly by pushing in while turning counter-clockwise. Bulb Socket Assembly Casquillo portalámparas Assemblage de la lampe ➢ Replace bulb by pushing in while turning clockwise. ➢ Only use a bulb rated 130 V AC-15 Watts or less. ➢ Reinstall bulb socket assembly into nozzle housing by pushing it back down into slot and reinstall bulb socket screw. ➢ Reinstall lower plate. Replacing Belt + + + ➢ Replace belt whenever a burning rubber smell caused by excessive slippage occurs. Felt Packing Empaquetadura de fieltro Cale en feutre Lift Agitator Up Unidad del agitador Soulever l'agitateur ➢ Remove lower plate. ➢ Lift rear belt cover and remove felt packing. ➢ Remove agitator by carefully lifting out. + ➢ Remove worn or broken belt. Motor Shaft Eje del motor Arbre d'entraînement du moteur Install New Belt Instalación de la correa Poser la nouvelle courroie ➢ Clean agitator. ➢ Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing. - 28 -