Panasonic MCV5268 MCV5268 User Guide - Page 30
CLEANING AGITATOR, entangled around agitator with a pair
View all Panasonic MCV5268 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Replacing Belt ➢ Reinstall agitator back into nozzle housing grooves. ➢ Close rear belt cover and reinstall felt packing. ➢ After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely. ➢ Reinstall lower plate. Cleaning Agitator ➢ Clean agitator after every five uses and every time the belt is replaced. ➢ Remove lower plate. ➢ Cut off any carpet pile and lint entangled around agitator with a pair of scissors. ➢ Remove agitator. ➢ Remove any string or debris located on the end caps, washers or agitator shaft. ➢ Reinstall agitator and lower plate. - 30 -
- 30 -
➢
Reinstall agitator back into nozzle
housing grooves.
➢
Close rear belt cover and reinstall felt
packing.
➢
After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
➢
Reinstall lower plate.
Replacing Belt
Cleaning Agitator
➢
Clean agitator after every five uses
and every time the belt is replaced
.
➢
Remove lower plate
.
➢
Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors
.
➢
Remove agitator
.
➢
Remove any string or debris located
on the end caps, washers or agitator
shaft
.
➢
Reinstall agitator and lower plate
.