Panasonic MCV5744 MCV5744 User Guide - Page 36
REMOVING CLOGS, cleaner OFF and UNPLUG POWER
View all Panasonic MCV5744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Hose Tuyau Manguera Tabs Languettes Lengüetas + Removing Clogs The hose located on the back of the vacuum cleaner carries the dirt from the nozzle up to the dust bag. If the hose should become clogged: ➢ Unplug vacuum. Suction Inlet Couvercle (entrée d'aspiration) Abertura de aspiración Motor Protector Protecteur du moteur Protector de motor Short Hose Tuyau court Manguera corta ➢ Press two tabs and pull open suction inlet and check for clogging. ➢ Disconnect hose from short hose and check the hose for clogging. ➢ Plug in vacuum cleaner and turn on. ➢ Stretch hose in and out to remove clog. ➢ If clog still exists, turn vacuum cleaner OFF and UNPLUG POWER CORD. ➢ Remove lower plate. ➢ Remove short hose from nozzle by lifting straight up. Short Hose Tuyau court Manguera corta ➢ Inspect hose end and clear any obstructions. ➢ Reinstall short hose. ➢ Reinstall lower plate. - 36 -