Panasonic PM31 Operating Instructions - Page 11

Radio - Tune Numeric buttons Manual tuning Memory preset 1 Press [TUNER/BAND] to select "FM" or "AM". 2 Press [PLAY MODE] to select "MANUAL". 3 Press[4/REW/ 4] or [3/FF/¢] to select the frequency of the required station. Up to 15 stations each can be set in the FM and AM bands. Preparation Press [TUNER/BAND] to select "FM" or "AM". Automatic presetting Press and hold [PROGRAM] to start presetting. • " " is displayed when a stereo FM broadcast is being received. To tune automatically Press [4/REW/4] or [3/FF/¢] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station. • Auto tuning may be interrupted when there is excessive interference. • To cancel auto tuning, press [4/REW/4] or [3/FF/¢] once again. To improve FM sound quality Press and hold [PLAY MODE] to display "MONO". To cancel Press and hold [PLAY MODE] again until "MONO" disappear. • MONO is also cancelled if the frequency is changed. • Turn off "MONO" for normal listening. RDS broadcasting (For Europe) Enable you to display the name of a broadcasting station or a program type. Press [DISPLAY] to display: Station Name (PS) Program Type (PTY) Frequency display • RDS displays may not be available if reception is poor. NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE Program type displays VARIED POP M ROCK M M.O.R.M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL A RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATIONAL OLDIES FOLK M DOCUMENT TEST ALARM M.O.R.M = "Middle of the road music" Manual presetting 1 Press [PLAY MODE] to select "MANUAL". 2 Press [4/REW/ 4] or [3/FF/¢] to tune to the required station. 3 Press [PROGRAM]. 4 Press numeric buttons to select a channel. • The station occupying a channel is erased if another station is preset in that channel. Selecting a preset station Press numeric buttons to select the channel. • For channels 10 to 15 press [h10], then the two digits. OR 1 Press [PLAY MODE] to select "PRESET". 2 Press [4/REW/ 4] or [3/FF/¢] to select the channel. AM allocation setting • This system can also receive AM broadcasts allocated in 10 kHz steps. To change the step from 9 kHz to 10 kHz 1 Press and hold [TUNER/BAND]. • After a few seconds the display changes to a flashing display of the current minimum frequency. 2 Continue to hold down [TUNER/BAND]. • When the minimum frequency changes, release the button. To return to the original step, repeat the above steps. • After changing the setting, previously preset frequency will be cleared. 11 RQT7928