Panasonic PM31 Operating Instructions - Page 5

Optional antenna connections FM outdoor antenna FM outdoor antenna (not included) AM ANT FM ANT 75 LOOP EXT /NLYFORTHE5+ 75 coaxial cable (not included) 5SETHEANTENNA PLUGADAPTOR INCLUDED  AM outdoor antenna AM ANT FM ANT AM outdoor antenna (not included)  M 75 LOOP EXT AM loop antenna (included) • Never use an outdoor antenna during a lightning storm. • You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation. • Disconnect the indoor FM antenna if an FM outdoor antenna is installed. • Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12m of vinyl-covered wire horizontally along a window or other convenient location. Step 2 - Inserting batteries into the remote control   !! 2 ,2   Step 3 - DEMO function ■ Batteries • Insert so the poles (+ and -) match those in the remote control. • Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. • Do not use rechargeable type batteries. • Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. Do not: • mix old and new batteries. • use different types at the same time. • heat or expose to flame. • take apart or short circuit. • attempt to recharge alkaline or manganese batteries. • use batteries if the covering has been peeled off. ■ Use • Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7 m directly in front of the unit. Refer to page 6 for the remote control sensor position. When the unit is first plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting "DEMO ON". Press and hold [STOP 7, -DEMO]. The display change each time the button is held down. DEMO OFF DEMO ON While in standby mode, select "DEMO OFF" to reduce power consumption. 5 RQT7928