Panasonic PM31 Operating Instructions - Page 16

Matsushita Electric Industrial Co., Ltd., Web Site - sc mp3

Page 16 highlights

Specifications AMPLIFIER SECTION RMS Output Power both channel driven 10% Total harmonic distortion 1 kHz (Low channel) SC-PM19 41 W per channel (6 Ω) 8 kHz (High channel) SC-PM19 39 W per channel (6 Ω) Total Bi-Amp power SC-PM19 80 W per channel Output Impedance Headphone 16Ω - 32Ω FM TUNER SECTION Frequency range 87.50 MHz - 108.00 MHz (50 kHz steps) Sensitivity 1.02 µV (IHF) S/N 26 dB 1.00 µV Antenna terminal(s) 75 Ω (unbalanced) AM TUNER SECTION Frequency range 522 kHz - 1629 kHz (9 kHz steps) 520 kHz - 1630 kHz (10 kHz steps) Sensitivity S/N 20 dB (at 999 kHz) 900 µV/m CASSETTE DECK SECTION Track system 4 track, 2 channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erase system AC erase 100 kHz Tape speed 4.8 cm/s Overall frequency response (+3 dB, -6 dB) at DECK OUT NORMAL 35 Hz - 14 kHz S/N RATIO 42.64 dB (A weighted) Wow and flutter 0.08% (WRMS) Fast forward and rewind time Approx. 120 seconds with C-60 cassette tape CD SECTION Disc CD, CD-R, CD-RW, MP3 Sampling frequency Decoding Pick up Beam source Wavelength (For Norge) Bølgelengde Laserstyrke Number of channels Frequency response Wow and flutter Digital filter D/A converter MP3 Bit rate Sampling frequency 8 cm/12 cm 44.1 kHz 16/20/24 bit linear Semiconductor laser 780 nm 780 nm Ingen farlig stråling sendes ut Stereo 20 Hz - 20 kHz (+1dB, -2 dB) Below measurable limit 8 fs MASH (1 bit DAC) 32 kbps - 320 kbps 32 kHz, 44.1 kHz, 48 kHz SPEAKER SECTION Type Speaker(s) Woofer Tweeter Impedance Input power (IEC) HIGH LOW Output sound pressure level For Australia and N.Z. For others 2 way, 2 speaker system 10 cm cone type 6 cm cone type 6 Ω 80 W (Max) 80 W (Max) 79 dB/W (1.0 m) 81 dB/W (1.0 m) Cross over frequency For Australia and N.Z. For others 3 kHz 2.5 kHz Frequency range For Australia and N.Z. For others Dimensions (WxHxD) For Australia and N.Z. For others Mass For Australia and N.Z. For others 45 Hz - 26 kHz (-16 dB) 50 Hz - 25 kHz (-10 dB) 55 Hz - 22 kHz (-16 dB) 75 Hz - 20 kHz (-10 dB) 153 mm x 254 mm x 239 mm 145 mm x 254 mm x 217 mm 1.8 kg 2 kg GENERAL Power supply For Continental Europe AC 230 V, 50 Hz For United Kingdom, Australia and N.Z. AC 230 - 240 V, 50 Hz Power consumption 130 W Dimensions (WxHxD) 175 mm x 254 mm x 391 mm Mass 5.6 kg Power consumption in standby mode 0.6 W Notes: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. 3. The labels "HIGH" and "LOW" on the rear of the speakers refer to High frequency and Low frequency. Maintenance If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this unit. • Before using chemically treated cloth, read the instructions that came with the cloth carefully. For a cleaner crisper sound Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included). When moving the unit 1 Remove all discs. 2 Press [y/I] to turn the unit off. 3 Disconnect the AC mains lead. Matsushita Electric Industrial Co., Ltd. Web Site: http://www.panasonic.co.jp/global/ En RQT7928-2B L1204CP2025

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Matsushita Electric Industrial Co., Ltd.
Web Site:
RQT7928-2B
L1204CP2025
En
Specifications
AMPLIFIER SECTION
RMS Output Power both channel driven
10% Total harmonic distortion
1
kHz
(Low channel)
SC-PM19
41
W per channel (6
Ω
)
8
kHz
(High channel)
SC-PM19
39
W per channel (6
Ω
)
Total Bi-Amp power
SC-PM19
80 W per channel
Output Impedance
Headphone
16
Ω
– 32
Ω
FM TUNER SECTION
Frequency range
87.50
MHz – 108.00
MHz (50
kHz steps)
Sensitivity
1.02
μV (IHF)
S/N 26
dB
1.00
μV
Antenna terminal(s)
75
Ω
(unbalanced)
AM TUNER SECTION
Frequency range
522 kHz – 1629
kHz (9
kHz steps)
520 kHz – 1630
kHz (10
kHz steps)
Sensitivity
S/N 20
dB (at 999
kHz)
900
μV/m
CASSETTE DECK SECTION
Track system
4 track, 2 channel
Heads
Record/playback
Solid permalloy head
Erasure
Double gap ferrite head
Motor
DC servo motor
Recording system
AC bias 100
kHz
Erase system
AC erase 100
kHz
Tape speed
4.8
cm/s
Overall frequency response (+3
dB, –6
dB) at DECK OUT
NORMAL
35
Hz – 14
kHz
S/N RATIO
42.64 dB (A weighted)
Wow and flutter
0.08% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with C-60 cassette tape
CD SECTION
Disc
CD, CD-R, CD-RW, MP3
8 cm/12 cm
Sampling frequency
44.1
kHz
Decoding
16/20/24 bit linear
Pick up
Beam source
Semiconductor laser
Wavelength
780
nm
(For Norge)
Bølgelengde
780
nm
Laserstyrke
Ingen farlig stråling sendes ut
Number of channels
Stereo
Frequency response
20
Hz – 20
kHz (+1dB, –2
dB)
Wow and flutter
Below measurable limit
Digital filter
8
fs
D/A converter
MASH (1 bit DAC)
MP3
Bit rate
32 kbps – 320 kbps
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
SPEAKER SECTION
Type
2 way, 2 speaker system
Speaker(s)
Woofer
10 cm cone type
Tweeter
6
cm cone type
Impedance
6
Ω
Input power (IEC)
HIGH
80
W (Max)
LOW
80
W (Max)
Output sound pressure level
For Australia and N.Z.
79
dB/W (1.0 m)
For others
81
dB/W (1.0 m)
Cross over frequency
For Australia and N.Z.
3
kHz
For others
2.5
kHz
Frequency range
For Australia and N.Z.
45
Hz – 26
kHz (–16
dB)
50
Hz – 25
kHz (–10
dB)
For others
55
Hz – 22
kHz (–16
dB)
75
Hz – 20
kHz (–10
dB)
Dimensions (WxHxD)
For Australia and N.Z.
153 mm x 254 mm x 239
mm
For others
145 mm x 254 mm x 217
mm
Mass
For Australia and N.Z.
1.8
k
g
For others
2
k
g
GENERAL
Power supply
For Continental Europe
AC 230 V, 50 Hz
For United Kingdom, Australia and N.Z.
AC 230 – 240 V, 50 Hz
Power consumption
130
W
Dimensions (WxHxD)
175 mm x 254 mm x 391 mm
Mass
5.6 k
g
Power consumption in standby mode 0.6 W
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
3. The labels “HIGH” and “LOW” on the rear of the speakers refer to
High frequency and Low frequency.
Maintenance
Maintenance
If the surfaces are dirty
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this
unit.
Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
For a cleaner crisper sound
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback
and recording.
Use a cleaning tape (not included).
When moving the unit
When moving the unit
1
Remove all discs.
2
Press [
y
/I] to turn the unit off.
3
Disconnect the AC mains lead.