Panasonic PT-D12000U Operating Instructions - Page 30
Installation of optional input modules
View all Panasonic PT-D12000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installation of (optional) input modules Installing the input module Types of the input modules (optional) Prepare beforehand an input module (optional) compatible with the input signals of the system. Module SD-SDI input module Module model No. ET-MD77SD1 Terminal BNC input × 1 BNC output × 1 RJ-45 input × 1*1 Signal formats supported SMPTE259M compliant : 480i, 576i 10BASE-T/100BASE-TX ET-MD77SD3 BNC input × 1 BNC output × 1 SMPTE259M compliant : 480i, 576i SMPTE292M compliant : 720/60p, 720/59.94p, 720/50p 1 035/60i, 1 035/59.94i, 1 080/60i, 1 080/59.94i 1 080/50i, 1 080/24sF, 1 080/23.98sF, 1 080/30p 1 080/29.97p, 1 080/25p, 1 080/24p, 1 080/23.98p RJ-45 input × 1*1 10BASE-T/100BASE-TX HD/SD-SDI input module ET-MD100SD4 BNC input × 2 Single link SD-SDI Signal : 480i, 576i Single link HD-SDI Signal (YPBPR 4:2:2) : 720/60p, 720/59.94p, 720/50p, 1 080/60i, 1 080/59.94i, 1 080/50i, 1 080/24sF, 1 080/23.98sF, 1 080/30p, 1 080/29.97p, 1 080/25p, 1 080/24p, 1 080/23.98p Dual link HD-SDI signal (RGB 4:4:4) : 1 920 × 1 080/50i, 1 920 × 1 080/59.94i, 1 920 × 1 080/60i, 1 920 × 1 080/23.98p, 1 920 × 1 080/23.98sF, 1 920 × 1 080/25p, 1 920 × 1 080/24p, 1 920 × 1 080/24sF, 1 920 × 1 080/29.97p, 1 920 × 1 080/30p Dual link HD-SDI signal (X' Y' Z' 4:4:4) : 2 048 × 1 080/23.98p, 2 048 × 1 080/23.98sF, 2 048 × 1 080/24p, 2 048 × 1 080/24sF DVI-D input module ET-MD77DV DVI-D 24p input × 1 HDCP-compliant*2 DVI-D single link, DVI 1.0 compliant 480p, 576p, 720/60p, 720/59.94p, 720/50p 1 080/60i, 1 080/59.94i, 1 080/50iɺ1 080/24sF, 1 080/23.98sF 1 080/30p, 1 080/29.97p, 1 080/25p, 1 080/24p, 1 080/23.98p 1 080/60p, 1 080/59.94p, 1 080/50p Displayable resolution VGA - WUXGA*3 (non-interlace) Dot clock frequency 25 - 162 MHz RJ-45 input × 1*1 10BASE-T/100BASE-TX *1: The LAN terminal present on the optional input module cannot be used with the PT-D12000U/PT-DZ12000U. Use the LAN terminal that is provided as standard with the projector. *2: HDCP (High-bandwidth Digital Content Protection) HDCP is a specification for encoding digital image signals which was developed to protect digital content. The DVI-D/HDMI output signals from the HDCP-compliant equipment have been encoded by the HDCP specifications to ensure content protection, but the DVI-D input module is capable of displaying the digital images properly since it complies with the HDCP specification. *3: The WUXGA signals support only VESA CVT-RB (Reduced Blanking) signals. 30 - ENGLISH