Panasonic PT-D4000U Operating Instructions - Page 54

Ceiling Mount Bracket Safeguards The followings are included with the other accessories. Wire cable (x 1) Wire fastening M6 screw (x 1) ;;;[TKLA3201] [XYN6+F10FJ] The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable provided with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for safety and security. Installation work of the ceiling mount bracket should only be carried by a qualified technician according to the following procedure. • Even if it is guarantee period, the manufacturer is not responsible for any hazard or damage caused by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental conditions. • Make sure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver. • An unused ceiling mount bracket should be removed promptly by qualified technician. max. 1 m (3'3") max. 1 m (3'3") (recommended) (recommended) Install the ceiling mount bracket according to the Installation Instructions. Attach anchor nuts or curl plugs available in the market (M8 or 5/16") to a strong ceiling surface in positions (left figure) so that there is no slack in the Anchoring nuts wire cable provided with the projector. or curled plugs (M8 or 5/16") Wire cable Flat washer Spring washer Hex head bolt (M8 or 5/16") Effective screw depth 10 mm Cabinet Exterior 54 Wire metal end fitting Securing Screw (M6) Pass the loop of wire rope through anchoring area and tighten the hex head bolts. Attach the metal fittings at the ends of the cable to the locking holes in the projector main unit using the provided wire fastening M6 screws, and tighten the screws firmly to secure the projector. * If for any reason the enclosed screw become lost or misplaced, please use the following. Screw diameter: M6, Length:10 mm (the effective thread depth on the receiving side is 10 mm) * Likewise if the screws for attaching the custom ceiling mount bracket go missing, please use the following. Screw diameter: M6, Length:10 mm (the effective thread depth on the receiving side is 10 mm) Torque Loading: 4±0.5 Nm (for 6 mm screw)