Panasonic PT-D4000U Operating Instructions - Page 57

Operation range - pt replacement lamp

Page 57 highlights

Model No. PT-D4000U Interface ports RGB2 input terminal Video input terminal S-Video input terminal Serial input/output terminal Remote1 input/output terminal Remote2 input terminal DVI-D input terminal LAN terminal 1 set of high-density, D-Sub 15-pin (female) [For YPBPR input] Y: 1.0 V [p-p] synchronization signal included, PBPR: 0.7 V[p-p] 75 Ω [For RGB input] 0.7 V[p-p] 75 Ω For G-SYNC: 1.0 V[p-p] 75 Ω HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted VD: TTL, high-impedance, positive/negative polarity automatically adjusted • HD/SYNC, VD terminals are not compliant with 3 value composite SYNC. 1 set BNC 1.0 V[p-p] 75 Ω 1 set Mini DIN 4-pin Y 1.0 V[p-p] C 0.286 V[p-p] 75 Ω Compliant with S1 signals 1 set each for D-Sub 9-pin (male/female), RS-232C compliant Used for personal computer control 1 set each for M3 stereo mini jack Wired remote control, used for link control 1 set D-Sub 9-pin (female) Used for external control 1 set DVI-D 24-pin Single link, compatible with HDCP 1 set RJ-45 Compliant with PJLinkTM Length of power cord Cabinet Outside dimensions Mass Working environment condition 3.0 m (9.8') Molded resin Width: 530 mm (20.8"); Height : 167 mm (6.6"); Depth: 425 mm (16.7") 13.7 k (30.2 lb) Ambient temperature*3 : 0 °C to 45 °C Ambient humidity : 20 % to 80 % (no condensation) Remote control Power source Operation range Mass Outside dimensions Option Hanging attachment (For high ceiling) Hanging attachment (For low ceiling) Projection lens Replacement lamp unit 3 V DC (two AA dry cells) approx. 30 m (98'5") (in front of beam receiver) 134 (0.31 lb) (including dry cells) Width: 51 mm (2"), Thickness: 23 mm (0.9"), Depth: 176 mm (6.9") ET-PKD56H ET-PKD55S ET-DLE100, ET-DLE200, ET-DLE300, ET-DLE400, ET-DLE050 ET-LAD40 (single bulb), ET-LAD40W (double bulbs) • The outside dimensions do not include the lens and other protruding parts. See page 59 for further details. *3 When using the projector at high altitudes (1 400 to 2 700 m : 4 593.2' to 8 858.3'), the upper limit for the ambient temperature drops by 5 °C. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

57
Interface ports
RGB2 input terminal
Video input terminal
S-Video input terminal
Serial input/output terminal
Remote1 input/output terminal
Remote2 input terminal
DVI-D input terminal
LAN terminal
1 set of high-density, D-Sub 15-pin (female)
[For YP
B
P
R
input]
Y: 1.0 V [p-p] synchronization signal included, P
B
P
R
: 0.7 V[p-p] 75
[For RGB input] 0.7 V[p-p] 75
For G-SYNC: 1.0 V[p-p] 75
HD/SYNC: TTL, high-impedance, positive/negative polarity
automatically adjusted
VD:
TTL, high-impedance, positive/negative polarity automatically adjusted
HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.
1 set BNC
1.0 V[p-p] 75
1 set Mini DIN 4-pin
Y 1.0 V[p-p] C 0.286 V[p-p] 75
Compliant with S1 signals
1 set each for D-Sub 9-pin (male/female), RS-232C compliant
Used for personal computer control
1 set each for M3 stereo mini jack
Wired remote control, used for link control
1 set D-Sub 9-pin (female)
Used for external control
1 set DVI-D 24-pin Single link, compatible with HDCP
1 set RJ-45 Compliant with PJLink
TM
Length of power cord
3.0 m (9.8')
Cabinet
Molded resin
Outside dimensions
Width: 530 mm (20.8"); Height : 167 mm (6.6"); Depth: 425 mm (16.7")
Mass
13.7 k
(30.2 lb)
Working environment condition
Ambient temperature*
3
: 0
°
C to 45
°
C
Ambient humidity
: 20 % to 80 % (no condensation)
Remote control
Power source
Operation range
Mass
Outside dimensions
3 V DC (two AA dry cells)
approx. 30 m (98'5") (in front of beam receiver)
134
(0.31 lb) (including dry cells)
Width: 51 mm (2"), Thickness: 23 mm (0.9"), Depth: 176 mm (6.9")
Option
Hanging attachment
(For high ceiling)
Hanging attachment
(For low ceiling)
Projection lens
Replacement lamp unit
ET-PKD56H
ET-PKD55S
ET-DLE100, ET-DLE200, ET-DLE300, ET-DLE400, ET-DLE050
ET-LAD40 (single bulb), ET-LAD40W (double bulbs)
The outside dimensions do not include the lens and other protruding parts. See page 59 for further details.
*
3
When using the projector at high altitudes (1 400 to 2 700 m : 4 593.2' to 8 858.3'), the upper limit for the ambient
temperature drops by 5
°
C.
PT-D4000U
Model No.