Panasonic PT-DW6300US Operating Instructions - Page 30

Replacement, Replacing the Lamp unit - bulb

Get Panasonic PT-DW6300US - DLP Proj Wxga 16:10 2000:1 6000 Lumens Rgb 35.3LBS PDF manuals and user guides
UPC - 791871111888
View all Panasonic PT-DW6300US manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Replacement Replacing the Lamp unit J Before replacing the Lamp unit Turn off the POWER switch of the projector in proper way and disconnect the power plug from the wall outlet. Wait for more than 1 hour and make sure the lamp unit and the surroundings are cooled enough. Prepare a Phillips-head screwdriver. Contact the dealer to purchase a replacement lamp unit (ET-LAD60:1 bulb unit, ET-LAD60W: 2 bulb units). When the projector is mounted on the ceiling, do not work directly under the projector or put your face closer to the projector. CAUTION: • The lamp may explode or shorten the lamp life by shocks or chipping damage. NOTE: • Prior to replacing the lamp unit, allow it to cool down to prevent the risk of burns, damage and other hazards. • Do not attempt replacement with an unauthorized lamp unit. J When to replace the lamp unit The lamp unit is consumable and the brightness decreases by duration of usage. The LAMP1/LAMP2 indicators will inform you of the replacement timing at 1 800 hours, and at 2 000 hours, the projector will be turned off. Those figures are rough guidance and might be shortened by the usage conditions, characteristics of the lamp unit, environmental conditions, and so on. You can check the duration of usage time using LAMP1/ LAMP2 of STATUS in the PROJECTOR SETUP menu. On screen LAMP indicator Indication REPLACE LAMP Over 1 800 hours Over 2 000 hours "REPLACE LAMP" is displayed on the upper left of the screen for 10 minutes. Press any button to clear the screen, or disappears after 10 minutes. "REPLACE LAMP" is displayed on the upper left Lights in red of the screen, and it will stay until you respond. To clear the screen, press any button. LAMP CAUTION: • If you keep using the lamp unit after 2 000 hours, it cause the damage of the projector. Automatically the projector will be powered off after 10 minutes. NOTE: • The guide times, 1 800 and 2 000 hours, are rough estimates based on certain conditions and are not a guaranteed time. • For more information about the lamp unit, such as guaranteed time, see the instructions which is provided with the lamp unit. Maintenance ENGLISH - 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
E
NGLISH - 30
Maintenance
Replacement
Before replacing the Lamp unit
T
urn off the
POWER
switch of the projector in proper way
and disconnect the power plug from the wall outlet.
Wait for more than 1 hour and make sure the lamp unit and the surroundings are cooled enough.
Prepare a Phillips-head screwdriver.
Contact the dealer to purchase a replacement lamp unit (ET-LAD60:1 bulb unit, ET-LAD60W: 2 bulb units).
When the projector is mounted on the ceiling, do not work directly under the projector or put your face
closer to the projector.
When to replace the lamp unit
The lamp unit is consumable and the brightness decreases by duration of usage. The
LAMP1
/
LAMP2
indicators will inform you of the replacement timing at 1 800 hours, and at 2 000 hours, the projector will be
turned off. Those figures are rough guidance and might be shortened by the usage conditions, characteristics
of the lamp unit, environmental conditions, and so on. You can check the duration of usage time using
LAMP1
/
LAMP2
of
STATUS
in the
PROJECTOR SETUP
menu.
Replacing the Lamp unit
CAUTION:
•
The lamp may explode or shorten the lamp life by shocks or chipping damage.
NOTE:
•
Prior to replacing the lamp unit, allow it to cool down to prevent the risk of burns, damage and other hazards.
•
Do not attempt replacement with an unauthorized lamp unit.
Indication
On screen
LAMP
indicator
Over 1 800 hours
“
REPLACE LAMP
” is displayed on the upper left
of the screen for 10 minutes. Press any button to
clear the screen, or disappears after 10 minutes.
Lights in red
Over 2 000 hours
“
REPLACE LAMP
” is displayed on the upper left
of the screen, and it will stay until you respond.
To clear the screen, press any button.
CAUTION:
•
If you keep using the lamp unit after 2 000 hours, it cause the damage of the projector. Automatically the projector will be powered off
after 10 minutes.
NOTE:
•
The guide times, 1 800 and 2 000 hours, are rough estimates based on certain conditions and are not a guaranteed time.
•
For more information about the lamp unit, such as guaranteed time, see the instructions which is provided with the lamp unit.
REPLACE LAMP
LAMP
LAMP