Panasonic PT-DW6300US Operating Instructions - Page 32

Replacement, Replacement procedure, Resetting the REMAINING, FILTER, ENGLISH - 32

Get Panasonic PT-DW6300US - DLP Proj Wxga 16:10 2000:1 6000 Lumens Rgb 35.3LBS PDF manuals and user guides
UPC - 791871111888
View all Panasonic PT-DW6300US manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Replacement J Replacement procedure 1. Loosen 1 ACF cover fixing screw until the screws turn freely and remove the ACF cover. J Resetting the REMAINING FILTER 1. Turn on the projector and display the FILTER COUNTER RESET in PROJECTOR SETUP menu. 2. Press the ENTER button. The confirmation screen will be displayed. 3. Select OK by pressing I, then press the ENTER button. 4. Display the STATUS in PROJECTOR SETUP menu and confirm the REMAINING FILTER. ACF cover fixing screw ACF cover 2. Slide out the ACF unit from the projector slowly. When you replace the ACF unit, clean the compartment and/or the air exhaust port if you need to. 3. Insert the new ACF unit into the compartment in correct direction and slightly push until it clicks. NOTE: • See FILTER COUNTER RESET and STATUS in PROJECTOR SETUP menu of the functional instructions that is in the provided CD-ROM. ACF unit 4. Attach the ACF cover and tighten 1 ACF cover fixing screw securely. NOTE: • If the ACF and/or ACF cover are attached incorrectly, the projector may not be turned on. • Do not switch the power on while the ACF cover removed. • The replacement timing of the ACF is 36 000 hours of use at maximum and it depends on environment of usage. Maintenance ENGLISH - 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
Maintenance
Replacement
E
NGLISH - 32
Replacement procedure
1.
Loosen 1 ACF cover fixing screw until the screws
turn freely and remove the ACF cover.
2.
Slide out the ACF unit from the projector slowly.
When you replace the ACF unit, clean the
compartment and/or the air exhaust port if you need
to.
3.
Insert the new ACF unit into the compartment in
correct direction and slightly push until it clicks.
4.
Attach the ACF cover and tighten 1 ACF cover
fixing screw securely.
Resetting the REMAINING
FILTER
1.
Turn on the projector and display the
FILTER
COUNTER RESET
in
PROJECTOR SETUP
menu.
2.
Press the
ENTER
button.
The confirmation screen will be displayed.
3. Select
OK
by pressing
I
, then press the
ENTER
button.
4.
Display the
STATUS
in
PROJECTOR SETUP
menu and confirm the
REMAINING FILTER
.
NOTE:
•
If the ACF and/or ACF cover are attached incorrectly, the
projector may not be turned on.
•
Do not switch the power on while the ACF cover removed.
•
The replacement timing of the ACF is 36 000 hours of use at
maximum and it depends on environment of usage.
ACF cover fixing screw
ACF cover
ACF unit
NOTE:
• See
FILTER COUNTER RESET
and
STATUS
in
PROJECTOR SETUP
menu of the functional instructions that
is in the provided CD-ROM.