Panasonic PT-LB10U Portable Projector -multi-lang - Page 45
Noise Reduction Nr, Blackboard, Back Color, Front/rear, Desk/ceiling, Fan Control, Lamp Power, Black
UPC - 791871111086
View all Panasonic PT-LB10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Noise Reduction (NR) (S-VIDEO/VIDEO only) If noise occurs from the projector because of a poor input signal, set "NR" to "ON". To turn off the "NR" feature, set it to "OFF". BLACKBOARD (PT-LB10NTU/PT-LB10U/PTLB10SU only) Set to "ON" when "PICTURE MODE" is set to "BLACK-BD". (Refer to page 37.) BACK COLOR BACK COLOR BLUE [ BLACK This sets the color which is projected onto the screen when no signal is being input to the projector. FRONT/REAR FRONT/REAR FRONT [ REAR This setting should be changed in accordance with the projector setting-up method. (Refer to page 19.) FRONT When the projector is placed in front of a screen. REAR When using a translucent screen. DESK/CEILING DESK/CEILING DESK [ CEILING This setting should be changed in accordance with the projector setting-up method. (Refer to page 19.) DESK When the projector is placed on a desk or similar. CEILING When the projector is suspended from a ceiling using the ceiling bracket (sold separately). FAN CONTROL FAN CONTROL STANDARD [ HIGH Set "FAN CONTROL" to "HIGH", when using this projector at high elevations (above 1 400 m) only. LAMP POWER LAMP POWER HIGH [ LOW This setting changes the lamp brightness. When set to "LOW", the luminance of the lamp is reduced, but the projector uses less power, and the operating noise is also reduced. This can help to extend the lamp's operating life. If using the projector in small rooms where high luminance is not required, it is recommended that you set the "LAMP POWER" to "LOW". NOTE: B "LAMP POWER" cannot be set when no signal is being input. ENGLISH-45 Adjustments and settings