Panasonic PT-LB10U Portable Projector - Page 11

SH H1 Projector position Top edge of screen Screen L Bottom edge of screen L: Projection distance SH: Image height SW:Image width H1: Distance from center of lens to bottom edge of projected image 81.2 (3-3/16) SW L Screen Projection distances Projection distance (L) 4:3 Screen PT-LB10NTU/PT-LB10U/ size PT-LB10SU (diagonal) Wide Telephoto (LW) (LT) PT-LB10VU/ PT-LB10SVU Wide Telephoto (LW) (LT) Height position (H1) 0.84 m(33˝) 1.02 m(40˝) 1.27 m(50˝) 1.52 m(60˝) 1.78 m(70˝) 2.03 m(80˝) 2.29 m(90˝) 2.54 m(100˝) 3.05 m(120˝) 3.81 m(150˝) 5.08 m(200˝) 6.35 m(250˝) 7.62 m(300˝) 1.2 m(3´11˝) 1.5 m(4´11˝) 1.8 m(5´10˝) 2.1 m(6´10˝) 2.4 m(7´10˝) 2.7 m(8´10˝) 3.0 m(9´10˝) 3.6 m(11´9˝) 4.5 m(14´9˝) 6.0 m(19´8˝) 7.5 m(24´7˝) 9.0 m(29´6˝) 1.1 m(3´7˝) 1.4 m(4´7˝) 1.7 m(5´6˝) 2.1 m(6´10˝) 2.4 m(7´10˝) 2.8 m(9´2˝) 3.2 m(10´5˝) 3.5 m(11´5˝) 4.2 m(13´9˝) 5.3 m(17´4˝) 7.1 m(23´3˝) 8.9 m(29´2˝) 10.7 m(35´1˝) 1.1 m(3´7˝) 0.08 m(3-1/8˝) 1.2 m(3´11˝) 1.4 m(4´7˝) 0.09 m(3-17/32˝) 1.5 m(4´11˝) 1.8 m(5´10˝) 0.11 m(4-5/16˝) 1.8 m(5´10˝) 2.1 m(6´10˝) 0.14 m(5-1/2˝) 2.1 m(6´10˝) 2.5 m(8´2˝) 0.16 m(6-9/32˝) 2.4 m(7´10˝) 2.9 m(9´6˝) 0.18 m(7-1/16˝) 2.8 m(9´2˝) 3.2 m(10´5˝) 0.20 m(7-27/32˝) 3.0 m(9´10˝) 3.6 m(11´9˝) 0.22 m(8-21/32˝) 3.7 m(12´1˝) 4.3 m(14´1˝) 0.26 m(10-7/32˝) 4.6 m(15´1˝) 5.4 m(17´8˝) 0.33 m(12-31/32˝) 6.1 m(20´) 7.3 m(23´11˝) 0.44 m(17-5/16˝) 7.6 m(24´11˝) 9.1 m(29´10˝) 0.55 m(21-5/8˝) 9.2 m(30´2˝) 11.0 m(36´1˝) 0.66 m(25-31/32˝) NOTE: B The dimensions in the table above are approximate. B If you use the projection distance for the 16:9 screen, the 4:3 projection image overflows the screen at the top and bottom. B For details about projected image distances, refer to page 61. 20-ENGLISH Connections Notes on connections B Read the instruction manual for each peripheral device carefully before connecting it. B Turn off the power supply for all peripheral devices before making any connections. B If the cables necessary for connection are not included with the peripheral device or available as an option, you may need to prepare a proper cable for the device concerned. B If there is a lot of jitter in the video signal, the projected image may flicker. In such cases, it will be necessary to connect a TBC (time base corrector). B Refer to the list on page 60 for details on compatible signals which can be input to the projector. B Only one audio system circuit is available for the AUDIO IN L-R connectors, so if you change the audio input source, you will need to remove and insert the appropriate plugs. Connecting to computer Computer for control use Monitor Serial adapter (ET-ADSER : sold separately) RGB signal cable DIN 8-pin (male) RGB signal cable (accessory) Computer Refer to the accessory CDROM for details on the wireless network that is used for controlling the projector with a personal computer by means of the wireless card. (PT-LB10NTU only) ENGLISH-21 Getting started