Panasonic PTAE200U PTAE200U User Guide - Page 11

Example of connecting to computer Computer Computer To audio output To DVI-D output To audio output To RGB output * This illustration is an example of connection for the PT-AE300U. NOTE: B It is better to shut down the computer before turning off the MAIN POWER switch of the projector. B Refer to the list of compatible signals on page 61 for the types of RGB signals which can be input to the projector by connecting a computer. B Only one audio system circuit is available for the AUDIO IN L-R jacks, so if you wish to change the audio input source, you will need to remove and insert the appropriate plugs. B The PT-AE200U does not have a DVI-D input (DVI-D IN) connector. 20-ENGLISH Setting-up Projection methods The projector can be set up so that any one of the following four projection methods can be used. Select whichever projection method matches the setting-up method. (The projection method can be set from the OPTION menu. Refer to page 40 for details.) DESK/CEILING DESK CEILING FRONT/REAR FRONT REAR (Factory default setting) NOTE: B You will need to purchase the separate ceiling bracket (ET-PKE300) when using the ceiling installation method. Projector position The projection range of this projector is 1.2 m - 7.4 m. The lower edge of the projected image falls about 0.1 m from the center of the lens. For details about projected image distances, refer to page 65. Projection Distance Screen Size Diagonal length 40˝ 60˝ 80˝ 100˝ 150˝ 200˝ Projection Distance (16:9) Height Width 0.5 m 0.8 m 1.0 m 1.3 m 1.9 m 2.5 m (1´7˝) (2´7˝) (3´3˝) (4´3˝) (6´2˝) (8´2˝) 0.9 m 1.3 m 1.8 m 2.2 m 3.3 m 4.4 m (2´11˝) (4´3˝) (5´10˝) (7´2˝) (10´9˝) (14´5˝) Minimum Distance 1.2 m 1.9 m 2.5 m 3.1 m 4.7 m 6.2 m (3´11˝) (6´2˝) (8´2˝) (10´2˝) (15´5˝) (20´4˝) Maximum Distance 1.4 m 2.2 m 2.9 m 3.7 m 5.6 m 7.4 m (4´7˝) (7´2˝) (9´6˝) (12´1˝) (18´4˝) (24´3˝) ENGLISH-21 Preparation