Panasonic PTFW300NTU Lcd Projector - Page 51

Troubleshooting Should any problem persist, contact your dealer. Problem Cause Power does not turn on. No picture appears. The picture is fuzzy. The color is pale or grayish. No sound can be heard from the internal speaker. The control buttons of the projector do not operate. The remote control does not operate. The picture does not display correctly. Picture from a computer does not appear. Picture from a computer DVI-D graphic board does not appear. The power cord may not be connected. The MAIN POWER switch is turned off. No electric supply is at the wall outlet. TEMP indicator is lit or flashes. LAMP indicator is lit or flashes. The lamp unit cover has not been securely installed. The circuit breakers have tripped. The video signal input source may not be connected to a terminal properly. The input selection setting may not be correct. The BRIGHTNESS adjustment setting may be at the minimum setting. The AV MUTE function may be in use. The lens focus may not have been set correctly. The projector may not be at the correct distance from the screen. The lens may be dirty. The projector may be tilted too much. COLOR or TINT adjustment may be incorrect. The input source which is connected to the projector may not be adjusted correctly. The audio signal source may not be connected properly. A cable may be connected to the VARIABLE AUDIO OUT terminal. The volume adjustment may be at the lowest possible setting. CONTROL PANEL of CONTROL DEVICE SETUP in SECURITY menu is disabled. If you have a loss of the remote control while the CONTROL PANEL is disabled, press and hold the MENU button for 2 seconds with pressing the ENTER button. REMOTE CONTROLLER of CONTROL DEVICE SETUP in SECURITY menu is disabled. The batteries may be weak. The batteries may not have been inserted correctly. The remote control signal receptor on the projector may be obstructed. The remote control unit may be out of the operation range. The signal format (TV-SYSTEM) may not have been set correctly. There may be a problem with the VCR or other signal source. A signal which is not compatible with the projector is being input. The cable may be longer than the optional cable. The external video output from a laptop computer may not be correct. (You may be able to change the external output settings by pressing the [Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method varies depending on the type of computer; refer to the documentation provided with your computer for further details.) COMPUTER2 SELECT setting in PROJECTOR SETUP menu is not correct. The graphic board driver of the computer needs to be updated to the latest version. DVI-D IN setting in DISPLAY OPTION menu may be incorrect setting. The computer may need to be restarted after switching DVI-D IN setting in DISPLAY OPTION menu of the projector correctly. Reference page 21 23 21 47 47 49 20 26 33 27 24 15 9 17 33 30 19 13 29 45 45 14 25 25 34 52 54 41 - 38 - Maintenance ENGLISH - 51