Panasonic PTL200U PTL200U User Guide - Page 39

ASPECT Refer page 30. AUTO SETUP (PC only) HORIZONTAL POSITION, VERTICAL POSITION, DOT CLOCK and CLOCK PHASE are matched to the input signal and are automatically adjusted. NOTE: B When the ASPECT is set to V- SCROLL (page 30), AUTO SETUP cannot be performed. Basic Operation Advanced Operation Option settings Use the F and G buttons to select an item, then press the I or H buttons to change the setting. OPTION OSD ON NR ON PC PRIORITY NORMAL BACK COLOR BLACK 4:3 H-POS CENTER FRONT/REAR FRONT D E S K / C E I L I N G DESK FAN CONTROL NORMAL LAMP POWER HIGH LAMP RUNTIME 5H SELECT ADJ ESC OSD OSD ON [ OFF ON OFF The signal name is displayed in the top-right corner of the screen when the input signal is changed. Use this setting when you do not want the signal name to be displayed. NR (Noise Reduction) (S-VIDEO/VIDEO/YPBPR only) NR ON [ OFF If noise occurs from the projector because of a poor input signal, set NR to "ON". To turn off the NR (Noise Reduction) feature, set it to "OFF". PC PRIORITY (PC only) PC PRIORITY NORMAL [ WIDE NORMAL displays the PC screen data in a 4:3 aspect ratio. WIDE displays the PC screen data in a 16:9 aspect ratio. BACK COLOR BACK COLOR BLACK [ BLUE This sets the color which is projected onto the screen when no signal is being input to the projector. This sets the background color for the left/right margins when the 4:3 aspect ratio is selected. (Refer to page 31.) 39