Panasonic PTL200U PTL200U User Guide - Page 57
Before Calling For Service
View all Panasonic PTL200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Before calling for service Before asking for service, check the following points. Problem Possible cause Power does not turn on. B The power cord may not be connected. B The MAIN POWER switch is turned off. B The main power supply is not being supplied to the wall outlet. B TEMP indicator is illuminated or flashing. (Refer to page 51.) B LAMP indicator is illuminated or flashing. (Refer to page 52.) B The lamp unit cover has not been securely installed. No picture appears. B The video signal input source may not be connected properly. B The input selection setting may not be correct. (Refer to page 22.) B The BRIGHT adjustment setting may be at the minimum possible setting. (Refer to page 34.) The picture is fuzzy. B The shutter function may be in use. (Refer to page 33.) B The lens cover may still be attached to the lens. B The lens focus may not have been set correctly. (Refer to page 23.) B The projector may not be at the correct distance from the screen. (Refer to page 21.) B The lens may be dirty. B The projector may be tilted too much. (Refer to page 23.) COLOR is too light or B COLOR or TINT adjustment may be incorrect. TINT is poor (Refer to pages 34 and 35.) No sound can be heard. B The input source which is connected to the projector may not be adjusted correctly. B The audio signal source may not be connected properly. B The volume adjustment may be at the lowest possible setting. (Refer to page 15.) B Make sure that the MUTE function is not activated. (Refer to page 33.) Others 57