Panasonic PV GS120 Digital Video Camcorder - Page 83

Others 5: Playing back or recording do not function, the screen has frozen or the indicator has disappeared. • Turn the Camcorder off. If the Camcorder is not turned off after operating the [OFF/ON] switch, press the [RESET] Button (-13-) first. And detach the Battery or AC Adaptor and then reattach it. Playback (Sound) 1: Sound is not played back from the built-in speaker of the Camcorder or the headphones. 0 Is the volume too low? During playback, push the [`VOL/JOG_] Lever to display the [VOLUME] Indicator and adjust the volume. (-42-) 2: Different sounds are reproduced at the same time. • [12bit AUDIO] on the [PLAYBACK] Sub-Menu of the [TAPE PLAYBACK MENU] has been set to [MIX]. As a result, the original sound and sound that was recorded by audio dubbing are played back together. It is possible to reproduce the sounds separately. (-51-) 3: The original sound was erased when audio dubbing was performed. • If you perform audio dubbing on a recording made in [16bit] Mode, the original sound will be erased. If you wish to preserve the original sound, be sure to select [12bit] Mode at the time of recording. 4: Sounds cannot be played back. • Although a Cassette with no audio dubbing is being played, is [12bit AUDIO] on the [PLAYBACK] Sub-Menu of the [TAPE PLAYBACK MENU] set to [ST2]? To play back a Cassette with no audio dubbing, [12bit AUDIO] must be set to [ST1]. (-52-) • Is the Variable Speed Search Function working? Press the [1] Button to cancel the Variable Speed Search Function. (-43-) Card 1: Recorded pictures are not clear. 0 Is [PICT QUALITY] on the [CARD] Sub-Menu set to [NORMAL] or [ECONOMY]? If recording is done with it set to [NORMAL] or [ECONOMY], images with fine details may include a mosaic-like pattern. Set [PICT QUALITY] to [FINE]. (-29-) 2: Photoshot Playback images do not look normal. • The picture may be damaged. In order to prevent the loss of image data, backing up on a Cassette or a personal computer is recommended. (-51-, -56-) 3: During Playback [UNPLAYABLE CARD] is displayed. • The image was either recorded in a different format, or data is damaged. 4: Even if a Card is formatted, it cannot be used. • Either the Camcorder or the Card may be damaged. Please consult a dealer. Others 1: The Magic Wire Remote Control with Narration Mic does not operate correctly. (PV-GS200 only) • If it is not plugged in tightly, it will not operate correctly. 2: The Camcorder clatters when shaking it. • It is the sound of the lens moving, not a malfunction. 3: When the USB Cable is disconnected, an error message will appear on PC. • To disconnect the USB cable safely, double-click the [ ] icon in the task tray and follow the instructions on the screen. (-64-) Explanation of Terms ª Digital Video System In a digital video system, images and sounds are converted into digital signals and recorded on a tape. This complete digital recording is capable of recording and playback with minimal image and sound deterioration. In addition, it automatically records data, such as Time Code and Date/Time, as digital signals. Compatibility with S-VHS or VHS Cassettes Because this Camcorder employs a digital system for recording image and sound data, it is not compatible with conventional S-VHS or VHS video equipment that employs an analog recording system. The size and shape of the Cassettes are also different. Compatibility with Output Signals Because AV signal output from the AV signal output jack is analog (the same as conventional video systems), this Camcorder can be connected with S-VHS or VHS video or a TV for playback. ª Focus Auto Focus Adjustment The Auto Focus System automatically moves the focusing lens inside the Camcorder forward and backward to bring the subject into focus so that the subject can be seen clearly. However, the Auto Focus System does not function properly for the following subjects or under the following recording conditions. -83-