Panasonic PVC923 PVC923 User Guide - Page 27

SYMPTOM TV shuts off. Closed caption is not activated. CAUSE TV station stopped broadcasting. Sleep timer is set. TV station experiencing problems or program tuned is not closed caption. TV signal is weak. The CC button is not depressed. POSSIBLE SOLUTION Tune new channel. Set Sleep Timer to "0". Try another channel. Check CATV connection of VHF/ UHF antenna, reposition or rotate antenna. Press the CC button to turn on the closed caption. PAGE 14 15 14 11,12 15 RECORDING TV recording does not work. The video cassette's erase prevention tab is broken off. Place a piece of vinyl tape over the hole. 20 The time is not set correctly. Reset the present time. 14 Timer recording does not The recording start/end time is not set correctly. Reset the start/end time. 22 work. The PROG TIMER button has not been Press the PROG TIMER button pressed (The PROG TIMER indicator is not lit). (The PROG TIMER indicator is lit). 22 PLAYBACK Tape is old or worn. Replace the tape. - Noise bars appear on the screen. Tracking adjustment is beyond range Adjust tracking manually using the of automatic tracking circuit. SET/TRACKING + or - buttons on the remote control. 20 Video heads are dirty. Clean the video heads. 25 REMOTE CONTROL The remote control is not aimed at the sensor. Aim the remote control at the remote sensor. 10 Remote control does not Distance is too far or too much light in the room. Operate within 15 feet or reduce the light of the room. 10 operate. There is an obstacle in the path of the beam. Clear the path of the beam. 10 The batteries are weak. Replace the batteries. 10 The batteries are not inserted Insert correctly. 10 correctly. If you cannot resolve the problem, please call the Customer Satisfaction Center for product assistance at 1-800-211-PANA(7262). To locate an authorized servicenter call toll free 1-800-211-PANA(7262) or send e-mail to : [email protected]. 27