Panasonic PVDF2735 PVDF2035 User Guide - Page 10
Connections
View all Panasonic PVDF2735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connections Notes on connections • Turn off the power supply for all components before making any connections. • If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned. • Read the instruction manual for each system component carefully before connecting it. Connecting the RF in Terminal CAUTION Overtightening "Nut type" RF coaxial cables may damage jacks. Finger tighten only. Antenna Connection Connect the cable from the Antenna to the VHF/UHF terminal on the unit. Connecting the "1, 2" AV Input Terminals Connects VCRs and other peripheral equipment AV Input terminal 1 is used VHF Antenna UHF Antenna Mixer 6IDEO /54 !UDIO 2 /54 , Cable Connection Connect the cable supplied by your local cable company to the VHF/UHF terminal on the unit. Notes: • Similar connections are available at the "1, 2" AV input terminals. • AV Input terminal 2 is located on the front of the unit. Cable Box In from CABLE Or Note to CABLE system installer: This reminder is provided to call the CABLE (Cable TV) System Installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 10 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo