Panasonic PVDM2092 PVDM2092 User Guide - Page 35

*Important: If a remote control button does not work when pressed, press the button on the remote and try the button again. Program End Search Locates end point of recording for continuity. 1 Press SEARCH twice in Playback or Stop mode to display PROGRAM END SEARCH screen . 2 PROGRAM END SEARCH Press FF to start search. SEARCH START:FF EXIT : SEARCH To cancel, press PLAY or STOP. Example of Program End Search operation. Fig.1 PLAYBACK DIRECTION Program 1 Program 2 or BLANK INDEX Press SEARCH button FF Fig.2 Program 1 BLANK End Point Program 2 BLANK INDEX Press SEARCH button FF End Point Fig.3 If search exceeds a few seconds in BLANK area. Press SEARCH button INDEX Program 1 End Point BLANK FF Program 2 Upon locating end point... The unit searches slightly past end point, reverse searches, and plays the last few seconds of the program, then stops. Press SEARCH button Advanced Operation Note • If Program End Search is started very close to an index mark, that mark may be skipped over. 35