Panasonic PVDM2092 PVDM2092 User Guide - Page 63

DVD/Video CD/CD Correction Play fails to start even when PLAY is pressed... Play starts but then stops immediately... Picture is distorted during rapid advance or rapid reverse... No Forward/Reverse search play... Play does not start even when title is selected... Audio soundtrack and/or subtitle language is not the one selected at the initial settings... No subtitles... • This unit cannot play discs other than DVDs, Video CDs and CDs. • The disc may be dirty and require cleaning. • Be sure disc is installed with label side up. • The picture will be somewhat distorted at times: this is normal. • Some discs may have sections which prohibit Forward/ Reverse search. (P. 21) • Confirm the "DVD LOCK" setting. (P. 57) • If the audio soundtrack and/or subtitle language selected at DVD initial settings does not exist on the disc, it will not be accessible. • Subtitles appear only when available on disc. • Select "ON" at the "Subtitle language" section (P. 48) to display subtitles. Alternative audio soundtrack (or subtitle) language cannot be selected... • Alternative language cannot be selected with discs which do not contain more than one language. • For some discs, alternative language cannot be selected with the AUDIO or SUB TITLE button. Try selecting it from the DVD menu if available. Angle cannot be changed... • This function is dependent on software availability. Even if disc has multiple angles, they may be recorded for specific scenes only (ANGLE Indicator on unit lights up). (P. 49) Miscellaneous Correction Video cassette cannot be inserted... • Insert the cassette window side up; record tab facing you. Video cassette cannot be removed... • Completely insert Power Plug into an AC outlet. Eject does not function or insertion cannot be done... • Turn the POWER off and then on, and try ejecting or inserting the tape again. Video cassette ejects when a recording is started, or the power is turned off for timer recording... • Make sure cassette record tab is intact. (P. 4) The disc cannot be removed... • First, unplug unit. Then, prepare a rigid wire (e.g. an extended paper clip, etc.) and, applying moderate force, insert it straight into the hole at the base of the tray. The tray will eject a little. Now, pull the tray all the way out and remove the disc. (P. 10) In Stop mode, the VCR motor (CYLINDER) continues to rotate... • To enable Quick Play mechanism, the VCR cylinder will rotate for about 3 minutes. This reduces response time from Stop to Play mode and from Play to Rewind Search mode. For Your Information 63