Panasonic PVDV73 PVDV73 User Guide - Page 14
Supplying Power
View all Panasonic PVDV73 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Supplying Power Charge the Battery Pack on the AC Adaptor POWER Lamp CHARGE Lamp 1 Connect and plug in the Power Cord as shown. • POWER Lamp will light. • Remove the DC Cable, if attached, from the adaptor. 2 Attach the Battery as shown to charge. • CHARGE Lamp lights up. It goes out when charging is complete (approx. 1 hour). Expect approx. 1 hour 20 minutes of operation (using EVF ) 3 when fully charged. Remove the Battery. Slide the Battery out and then lift up. Note About the Flashing of the CHARGE Lamp • Charge the Battery within an ambient temperature range of 10 °C (50 °F) and 30 °C (86 °F). • If charging is done in extreme low or high temperatures, Battery charge time increases. CHARGE Lamp flashes when... • The Battery is being charged, but charging is taking longer than normal. • Charging is not possible. Remove the Battery once, wait a short time, then re-attach it for charging. Insert the Battery Pack Remove the Battery Pack 21 1 3 2 1 Insert the Battery Pack and slide it up until it locks with a click. BATT RELEASE 1 Tilt Viewfinder upward. 2 Remove the Battery Pack and slide the Battery downward while sliding the BATT RELEASE. 14 Forassistance, pleasecall: 1-800-211-PANA(7262)orsende-mailto:[email protected]