Panasonic PVL353D PVL353 User Guide - Page 13

Using MENU Mode Getting Started 1, 2, 3, 4 Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA or VCR. 1 Press MENU for MENU mode. The CAMERA or VCR MENU screen (see below left) appears when Menu mode is entered. 2 Press UP or DOWN to highlight the desired menu item. 3 Press M.FOCUS to set selection. 4 Press MENU to exit. Note: • The Menu mode is canceled if UP/DOWN, M.FOCUS, or MENU are not pressed within 5 minutes when Self Demo mode is off with no cassette tape and/or battery inserted. • The Menu mode is canceled if UP/DOWN, M.FOCUS, or MENU are not pressed within 30 seconds when Self Demo mode is on with no cassette tape and/or battery inserted. Camera Mode Menu Screen 1 2 3 4 5 6 7 8 9 10 VCR Mode Menu Screen 3 6 7 1 REC MODE (page 17). Change to desired tape speed, SP/SLP. 2 SHUTTER (page 25). Select desired shutter speed. 3 LCD BRIGHT (pages 17, 20). LCD BRIGHT SETTING sub menu is displayed. Adjust LCD monitor brightness level. 4 DIGITAL EFFECTS (pages 26~28, 30). DIGITAL EFFECTS sub menu is displayed. To select DIGITAL ZOOM, MOTIONSENSOR, or FADE. 5 PROGRAMMED REC (page 19). Camcorder starts and stops recording at a preset time. 6 DISPLAY SET (pages 31, 32). DISPLAY SET sub menu is displayed. To select DISPLAY or MODE SELECT. 7 CLOCK SET (pages 14, 15). CLOCK SET sub menu is displayed. Set the Date and Time. 8 STAND-BY RELEASE (page 18). ON : Enables quick resumption of recording from Stand-by mode. 9 LIGHT MODE (page 16). OFF/ON : Light can be set ON or OFF. OFF/ON/AUTO : Light can be set ON, OFF, or AUTO. 10 SELF DEMO (page 7). ON : SELF DEMO screen is displayed. 13