Panasonic PVL353D PVL353 User Guide - Page 20

Playing Back Recordings Before you begin... • Connect Camcorder to power source. • Insert recorded tape. 1 Speaker 3 D A B C E Playback on EVF or LCD Monitor 1 Press LCD-OPEN and swing LCD monitor fully open. 2 Set POWER to VCR. • If tape has no record tab, auto playback begins. • EVF or LCD monitor turns on/off by the POWER switch. 3 Playback function buttons. A (REWIND/SEARCH) : Rewind tape. B (PLAY/STILL) : Play tape. C (FAST FORWARD/SEARCH) : Fast Forward tape. D (STOP) : Stop tape. E VOLUME : During playback, adjust volume of speaker. Press "W" : Press "T" : Volume down. Volume up. Note: • Using LCD monitor reduces battery operating time. Return LCD monitor to locked position when not in use. • During playback, press MENU to adjust LCD 2 monitor brightness (page 17). Special Effects Quick Visual Search Tracking Control Search Speed • SP (Standard Play) : 3 times normal. • SLP (Super Long Play) : 9 times normal. During playback, press: • (FAST FORWARD/SEARCH) : fast forward search • (REWIND/SEARCH) : rewind search Auto Tracking Continuously analyzes each recording for optimum picture quality. Manual Tracking Some recordings require manual adjustment to reduce noise. Press UP or DOWN until Playback picture clears up. Press M.FOCUS to return to Auto Tracking. Press again or press normal play. (PLAY/STILL) for Still Picture Press (PLAY/STILL) to freeze picture. Press again for normal play. This feature works best in SLP mode (page 11). Note: • During search, horizontal noise bars will appear. Audio is muted. • To protect video heads and tape, operating modes will revert as follows after 5 minutes: Still Stand-by Stand-by Power off (when Battery Pack is used). • Tape auto-rewinds if played or fast forwarded to end. 20 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]