Panasonic RR-QR120 Ic Recorder - Page 3

Recording Files can be stored in 4 separate "folders" (A,B,C,D). Each folder can hold up to 99 files. Total recording time depends on the recording mode. Recording mode Available recording time (Combined time of all the files) HQ (High quality) (factory setting) SP (Standard play) LP (Long play) 16 minutes 33 minutes 105 minutes ∫ Changing recording mode Press [REC MODE]. Recording mode changes each time you press the button. HQ ) SP ) LP ^_____-- n HQ A Note . ≥The recording being made can be lost if the unit receives a shock (e.g. it is dropped), or if the batteries and cover come loose. ≥Leave VAS (below) off when recording important files. Built-in microphone Recording indicator 1 Press [$FOLDER / %MENU] to select the folder to record into. External microphone jack HQ [MIC (PLUG IN POWER)] B 2 Press [REC]. Recording begins and the record- ing indicator lights. The meter shows the Meter recording level. File number 0ɹɹɾɹɹ50ɹɹɾɹ100ɹ
HQ B Recording time HM S "FULL" is displayed when there is no time or file numbers left. Erase unnecessary files to continue recording. (page 7) 3 Press [STOP]. Recording stops. The display changes in the following order: HQ HQ HQ HQ B REC DATE M D Date B REC DATE PM Time B H M S Length B Total number of files ∫ Preventing unnecessary recording (Voice activated system: VAS) VAS detects silence and pauses recording automatically. The voice mark flashes while VAS is waiting for a sound to record. 1 Press and hold [$FOLDER /%MENU] while stopped. 2 Within 10 seconds, press [$FOLDER / %MENU] until " " is displayed. 3 Within 10 seconds, press [9] to select "On". 4 Within 10 seconds, press [1]. VAS is now on. To turn the function off: Press [:] to select "OFF" in step 3 and press [1]. ∫ Changing microphone sensitivity MIC SENSE H L [H] (High): (Factory setting) Relatively soft sounds are recorded. MIC SENSE H L [L] (Low): Only relatively louder sounds are recorded. Use when recording close to the mouth. ∫ Recording through the external microphone (not included) Plug the external microphone into the [MIC (PLUG IN POWER)] jack. Then follow steps 1-3 as illustrated above. You can use a condenser microphone without a built-in power supply. Plug type: 3.5 mm (1⁄8 in.) monaural ∫ Checking available recording time Press [$FOLDER /%MENU] while recording. Press again to restore the display. This display also appears when the remaining time becomes very short. Press [$FOLDER / %MENU] to show the normal recording display. HQ B H M S When you are not recording, the meter gives you an idea of how much memory is left. It reduces from right to left as the memory reduces. When the remaining memory becomes very low, the meter will flash. 0ɹɹɾɹɹ50ɹɹɾɹ100ɹ HQ B PM 4 5