Panasonic RX400U CQRX100U User Guide - Page 15

Radio (AM/FM) [SRC] (Source) selects a source. [TUNE ] [TUNE ] down/up the frequency. (Hold it down for more than 0.5 seconds and release it for seek tuning.) [DISP] (Display) switches the information on the display. [BAND] selects a band in the radio source. [APM] (Auto Preset Memory) executes APM in the radio source. (Hold it down for more than 2 seconds.) Preset buttons [1] to [6] selects a preset station in the radio source, and presets the current station. (Hold it down for more than 2 seconds.) 1 Press [SRC] to select the radio source. 2 Press [BAND] to select a band. Frequency Adjustment [TUNE ]: Lower [TUNE ]: Higher Note: Hold down for 0.5 sec. or more and release for station search. 3 Select a station. Preset Station Selection Press the corresponding preset button from [1] to [6] to tune in a preset station. Operation Flow Radio Source Display Station Preset Band Frequency Preset Number lights while receiving an FM stereo signal. Display Change Press [DISP] to change the display. Radio mode display (Default) Clock display Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively. Preset stations can be simply called up by pressing [1] to [6]. Auto Preset Memory (APM) With this operation, stations with good receiving conditions can be automatically stored in the preset memory. 1 Select a band. 2 Hold down [BAND] (APM) for more than 2 seconds. The preset stations under best receiving conditions are received for 5 seconds each after presetting the stations (SCAN). To stop scanning, press one of the buttons from [1] to [6]. Manual Station Preset 1 Tune into a station. 2 Hold down one of the preset buttons from [1] to [6] for more than 2 seconds. (blinks once) Note: New stations overwrite existing saved stations. Note: New stations overwrite existing saved stations. - 15 -