Panasonic SAAK310 SAAK110 User Guide - Page 10

Cassette deck operations Cassettes SLEEP CLOCK PLAY AUTO OFF TIMER REC DISC 1 2 3 PROGRAM 4 5 6 S.SOUND EQ 7 8 9 PRESET EQ 0 10 CD TUNER BAND AUX TAPE VOL MUTING REW VOL CLEAR FF CD DISP DIMMER PLAY MODE You can use either deck 1 or deck 2 for tape playback. Use normal position tapes. High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes. 1 Press [:, TAPE]. The unit comes on. If a cassette was loaded, play starts automatically (One touch play). 2 Press [c, DECK 1] or [c, DECK 2] and insert the cassette. Insert with the side to be played facing towards you and the Front side exposed tape facing down. Close the holder by hand. 3 Press [:, TAPE] to start playback. To play on the other side of the tape, turn the tape over and press [:, TAPE]. To stop tape playback Press [L, STOP]. To fast-forward or rewind Press [g/REW/3] (rewind) or [f/FF/4] (fast-forward). To select between loaded decks Press [DECK 1/2] (remote control: [PLAY MODE]). Notes • Tape playback is momentarily interrupted if you open the other deck. • Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. • Tape slack can get caught up in the mechanism and should be taken up before the tape is played. • Endless tapes can get caught up in the deck's moving parts if used incorrectly. Using the built-in sound quality/ sound field settings SLEEP CLOCK PLAY AUTO OFF TIMER REC DISC 1 2 3 PROGRAM 4 5 6 S.SOUND EQ 7 8 9 PRESET EQ 0 10 CD TUNER BAND AUX TAPE VOL MUTING REW VOL CLEAR FF CD DISP DIMMER PLAY MODE Press [PRESET EQ] to select a setting. Every time you press the button: HEAVY SOFT CLEAR DISCO LIVE HALL EQ-OFF (cancelled) HEAVY (sound quality) : Adds punch to rock SOFT (sound quality) : For background music CLEAR (sound quality): Clarifies higher sounds DISCO (sound field) : Produces sound with the same kind of lengthy reverberations heard at a disco LIVE (sound field) : Makes vocals more alive HALL (sound field) : Adds an expansiveness to the sound to produce the atmosphere of a great concert hall. 10 Note You cannot use PRESET EQ and SUPER SOUND EQ together. RQT6693 Enhancing the sound quality SUPER SOUND EQ S.SOUND EQ SLEEP CLOCK PLAY AUTO OFF TIMER REC DISC 1 2 3 PROGRAM 4 5 6 S.SOUND EQ 7 8 9 PRESET EQ 0 10 CD TUNER BAND AUX TAPE VOL MUTING REW VOL CLEAR FF CD DISP DIMMER PLAY MODE You can enhance the bass and treble effect of the sound. Press [SUPER SOUND EQ]. Remote control: Press [S.SOUND EQ]. The button light comes on. Press the button again to cancel. The button light goes out. Recording SLEEP CLOCK PLAY AUTO OFF TIMER REC DISC 1 2 3 PROGRAM 4 5 6 S.SOUND EQ 7 8 9 PRESET EQ 0 10 CD TUNER BAND AUX TAPE VOL MUTING REW VOL CLEAR FF CD DISP DIMMER PLAY MODE PLAY MODE Selection of tapes for recording Use normal position tapes. High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly. Preparation: Wind up the leader tape so recording can begin immediately. 1 Press [c, DECK 2] and insert the cassette to be recorded. Insert with the side to be recorded facing towards you and the exposed tape facing down. 2 Select the source to be recorded. Radio recording: Tune in the station. (A page 7) CD recording: 1 Insert the CD(s) you want to record. Press [:/J, CD] and then [L, STOP]. 2 Prepare the desired CD recording mode. • To record programmed tracks (A "Program play" on page 9: steps 1-3). • To record specific CDs/tracks 1-DISC/ALL-DISC recording Do steps 1 to 2 on page 9: "To listen to specific CDs and tracks (CD Play Mode function)". Ensure CD is stopped. 1-SONG recording 1. Do steps 1 to 2 on page 9: "To listen to specific CDs and tracks (CD Play Mode function)". Ensure CD is stopped. 2. Press [g/REW/3] or [f/FF/4] to select the track. Tape-to-tape recording: 1 Press [:, TAPE] and then [L, STOP]. 2 Press [c, DECK 1] and insert the cassette you want to record. 3 Press [a REC] to start recording.