Panasonic SAAK310 SAAK110 User Guide - Page 15
Specifications, Product Service, Product Information, Speaker General, Amplifier
View all Panasonic SAAK310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Specifications AMPLIFIER SECTION SC-AK310 Power output 10% Total harmonic distortion 60 Hz-3 kHz, both channels driven (Low channel) 40 W per channel (6 Ω) 3 kHz-16 kHz, both channels driven (High channel) 40 W per channel (6 Ω) Total Bi-Amp power 80 W per channel Power output 10% Total harmonic distortion 1 kHz, both channels driven (Low channel) 55 W per channel (6 Ω) 10 kHz, both channels driven (High channel) 55W per channel (6 Ω) Total Bi-Amp power 110 W per channel Input sensitivity AUX 250 mV Input Impedance AUX 13.3 kΩ AMPLIFIER SECTION SC-AK110 Power output 10% Total harmonic distortion 60 Hz-16 kHz, both channels driven 60 W per channel (6 Ω) Power output 10% Total harmonic distortion 1 kHz, both channels driven 80 W per channel (6 Ω) Input sensitivity AUX 250 mV Input Impedance AUX 13.3 kΩ FM TUNER SECTION Frequency range 87.9 - 107.9 MHz (200 kHz steps) 87.5 - 108.0 MHz (100 kHz steps) Sensitivity 2.5 µV (IHF) S/N 26 dB 2.2 µV Antenna terminal(s) 75 Ω (unbalanced) AM TUNER SECTION Frequency range 520 - 1710 kHz (10 kHz steps) Sensitivity S/N 20 dB (at 1000 kHz) 560 µV/m CASSETTE DECK SECTION Track system 4 track, 2 channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erasing system AC erase 100 kHz Tape speed 4.8 cm/s (17/8 ips) Overall frequency response (+3 dB, -6 dB at DECK OUT) NORMAL (TYPE I) 35 Hz - 14 kHz S/N 50 dB (A weighted) Wow and flutter 0.18% (WRMS) Fast forward and rewind time Approx. 120 seconds with C-60 cassette tape CD SECTION Sampling frequency 44.1 kHz Decoding 16 bit linear Beam source/wavelength Semiconductor laser/780 nm Number of channels Stereo Frequency response 20 Hz-20 kHz (+1, -2 dB) Wow and flutter Below measurable limit Digital filter 8 fs D/A converter MASH (1 bit DAC) SPEAKER SECTION SB-AK310 Type 3 way, 3 speaker system Speaker(s) Woofer Tweeter Super tweeter 16 cm (61/2˝) cone type 6 cm (23/8˝) cone type 2.5 cm (1˝) Piezo type Impedance HIGH 6 Ω LOW 6 Ω Input power HIGH 110 W (Music) LOW 110 W (Music) Output sound pressure level 86.5 dB/W (1.0 m) Cross over frequency 3.5 kHz, 10 kHz Frequency range 35 Hz-25 kHz (-16 dB) 47 Hz-24 kHz (-10 dB) Dimensions (WxHxD) 227 x 344 x 243 mm Mass (815/16˝ x 1317/32˝ x 99/16˝) 3.3 kg (7.3 lb.) SPEAKER SECTION SB-AK110 Type 2 way, 2 speaker system Speaker(s) Woofer Tweeter Impedance 16 cm (61/2˝) cone type 6 cm (23/8˝) cone type 6 Ω Input power 160 W (Music) Output sound pressure level 86.8 dB/W (1.0 m) Cross over frequency 4 kHz Frequency range 45 Hz-30 kHz (-16 dB) 60 Hz-26 kHz (-10 dB) Dimensions (WxHxD) 220 x 330 x 227 mm Mass (821/32˝ x 13˝ x 815/16˝) 3.0 kg (6.6 lb.) GENERAL Power supply AC 120 V, 60 Hz Power consumption 165 W Dimensions (WxHxD) 250 x 330 x 370 mm (927/32˝ x 13˝ x 143/8˝) Mass SC-AK310 7.6 kg (16.7 lb.) SC-AK110 7.0 kg (15.4 lb.) Power consumption in standby mode: 0.34 W Notes: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. 3. SB-AK310 only The labels "HIGH" and "LOW" on the rear of the speakers refer to High frequency and Low frequency. Reference Product Service 1. Damage requiring service -The unit should be serviced by qualified service personnel if: (a)The AC power supply cord or AC adaptor has been damaged; or (b)Objects or liquids have gotten into the unit; or (c)The unit has been exposed to rain; or (d)The unit does not operate normally or exhibits a marked change in performance; or (e)The unit has been dropped or the cabinet damaged. 2. Servicing -Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 3. Replacement parts -When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 4. Safety check -After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. Product information For product information or assistance with product operation: In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail [email protected], or web site (http://www.panasonic.com). In Canada, contact Panasonic Canada Inc. Customer Care Centre at 905-624-5505, web site (www.panasonic.ca), or an authorized Servicentre closest to you. 15 RQT6693