Panasonic SAAK310 SAAK110 User Guide - Page 7
THE RADIO: MANUAL TUNING, Selecting channels
View all Panasonic SAAK310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Cassette deck operations The radio: manual tuning 1 3 3 SLEEP CLOCK PLAY AUTO OFF TIMER REC DISC 1 2 3 PROGRAM 4 5 6 S.SOUND EQ 7 8 9 PRESET EQ 0 10 CD TUNER BAND AUX TAPE VOL MUTING REW VOL CLEAR FF CD DISP DIMMER PLAY MODE 2 1 Press [TUNER/BAND] to select band. The unit comes on. Every time you press the button: FM ↔ AM 2 Press [PLAY MODE] on the remote control to select "MANUAL". Every time you press the button: MANUAL ↔ PRESET 3 Hold down [g/REW/3] or [f/FF/4] for a moment to search for a station. The frequency stops when it finds a clear station. To stop during the process, press [g/REW/3] or [f/FF/4]. Under excessive interference, a station may not be found. Press [g/REW/3] or [f/FF/4] repeatedly to tune step-bystep. "TUNED" is displayed when a radio station is tuned. "ST" is displayed when a stereo FM broadcast is being received. If noise is excessive in FM Remote control only Hold down [PLAY MODE] to display "MONO". Monaural sound is selected and noise reduces when reception is weak. Hold down [PLAY MODE] again to cancel the mode. "MONO" is also cancelled if the frequency is changed. To receive FM broadcasts allocated in 0.1 MHz steps Main unit only Hold down [TUNER/BAND]. The display changes in a few seconds to show the current minimum FM frequency. Continue to hold down the button until the minimum frequency changes. The step is changed. Repeat the above to change the step back. Notes • After changing the "allocation" setting, the frequencies you previously preset in the memory will be cleared. • Sound is momentarily interrupted if you load/unload tapes while listening to an AM broadcast. The radio: preset tuning Remote control only There are two methods of pre-setting stations. Automatic presetting : All the stations the tuner can receive are preset. Manual presetting : You can select the stations to preset and the order they are preset in. Up to 15 stations each can be set in the FM and AM bands. SLEEP CLOCK PLAY AUTO OFF TIMER REC DISC 1 2 3 PROGRAM 4 5 6 S.SOUND EQ 7 8 9 PRESET EQ 0 10 CD TUNER BAND AUX TAPE VOL MUTING REW VOL CLEAR FF CD DISP DIMMER PLAY MODE Preparation: Press [TUNER BAND] to select "FM" or "AM". Automatic presetting Do the following once each for FM and AM. Preparation: Tune to the frequency where pre-setting is to begin. Hold down [PROGRAM] until the frequency changes. The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorized is tuned in. SC-AK310 SC-AK110 Manual presetting Pre-set the stations one at a time. 1 Press [PROGRAM] then press [g, REW/3] or [f, 4/FF] to tune to the desired station. 2 Press [PROGRAM] then press [g, REW/3] or [f, 4/FF] to select a channel. 3 Press [PROGRAM]. The station occupying a channel is erased if another station is preset in that channel. Selecting channels Press the numbered buttons to select the channel. To enter channel 10 or over, press [X10], then the two digits. SC-AK310 SC-AK110 Recording operations OR 1 Press [PLAY MODE] to select "PRESET". 2 Press [g, REW/3] or [f, 4/FF] to select the channel. 7 RQT6693