Panasonic SAHT650 SAHT650 User Guide - Page 38

Troubleshooting guide Picture Picture distorted. ≥Some distortion is normal during SEARCH. - No picture. ≥Check the connection. 8 ≥Make sure the television is on. - ≥Ensure the television's video input setting (e.g., VIDEO 1) is correct. - The picture shown on the ≥Go to Video in the SETUP menus, and change "TV Aspect" to suit your television. 32 television is not normal. ≥Use the television to change the aspect to the correct one. - (The sides of the picture are cut If your television cannot change the aspect when input is progressive, try changing 4:3 24 off, the picture is stretched horizontally, or black bands Aspect with the on-screen menu icons. ≥Ensure that the unit is connected directly to the television, and is not connected through a video - appear at the top and bottom of cassette recorder. the screen.) ≥Connect to the component video (480P) input terminals on a television compatible with this 8 unit's copy guard system. You cannot view progressive video if your television is not compatible. ≥Change the size with the variable zoom function. 18 ≥The images on PAL system DVD-Audio are compressed for display. They may also appear - vertically stretched. There is ghosting when ≥Press [PROGRESSIVE OUT] so the indicator goes out. This problem is caused by the editing 12 progressive output is on. method or material used on DVD-Video, but should be corrected if you use interlace output. Picture quality is poor. ≥Check the settings in the On-Screen Menu Icons' Picture Menu. 24 The picture on the television ≥Mobile telephone chargers can cause some disturbance. - disappears or stripes appear on ≥The location and orientation of the antenna are incorrect. If you are using an indoor antenna, 34 the screen. change to an outdoor antenna. ≥The television antenna wire is too close to the unit. Separate the antenna wire of the television - from the unit. Menus not displayed correctly. ≥Change the zoom ratio to "k1.00". 18 ≥With the on-screen icon menus, change "Subtitle Position" to "0" or change "4:3 Aspect" to 24 "Normal". Listening to the radio Noise is heard. ≥Adjust the position of the FM or AM antenna. - "ST" flickers or doesn't light. ≥Use an outdoor antenna. 34 Sound is distorted. A beat sound is heard. ≥Turn the television off or separate it from the unit. - A low hum is heard during AM ≥Separate the antenna from other cables and cords. - broadcasts. Unit displays The display is dark. ≥Press [SHIFT]i[FL DISPLAY] to brighten the display. 29 "NO PLAY" ≥You inserted a disc the unit cannot play; insert one it can. 5 ≥You inserted a blank DVD-RAM. - "NO DISC" ≥You haven't inserted a disc; insert one. - ≥You haven't inserted the disc correctly; insert it correctly. 12 "F61" ≥Check and correct the speaker cord connections. 7 If this does not fix the problem, there is a power supply problem. Consult the dealer. "DVD U11" ≥Disc is dirty. Wipe it clean. 5 "ERROR" ≥Incorrect operation performed. Read the instructions and try again. - "DVD H∑∑" ≥Trouble may have occurred. The number following "H" depends on the status of the unit. - ∑∑ stands for a number. Reset procedure: Press [Í] to switch the unit to the standby mode and then back to ON. Alternatively, press [Í] to switch the unit to the standby mode, disconnect the AC power supply cord, and then reconnect it. ≥If the service numbers fail to clear, note the service number and contact a qualified service - person. Television displays No on-screen display. ≥Go to Display in the SETUP menus, and select "On" for "On-Screen Messages". 32 On-Screen Menu Icons not ≥Press [3, 4] while the rightmost icon is highlighted to move them down. 22 displayed or only partially displayed on the television. The disc's menu is displayed in ≥Go to Disc in the SETUP menus, and select the preferred language for "Menus". 32 a different language. "Cannot display group xx, ≥You are trying to display incompatible pictures. - picture xx." RQT7089 38 Reference