Panasonic SAHT700 SAHT690 User Guide - Page 11
Other speaker setup options, Remove the stand., Screw a screw not included into the, wall.
View all Panasonic SAHT700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Simple setup Other speaker setup options Attaching to a wall [HT900] (Center speaker only) [HT700] [HT690] [Note] The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 Ib.) per screw. Remove the stand. ([HT900] only) BEFORE REMOVING THE STAND ≥Take the speaker cable out of the stand's hole if it is threaded through. ≥Lay the speaker on a soft cloth. Unscrew the screw with a Phillips-head screwdriver. 1 Screw a screw (not included) into the wall. Wall 30-35 mm (13/16 q - 13/8q) ‰7.5-9.4 mm (19/64q - 3/8q) 8-11 mm (3/8q - 7/16q) 2 Fit the speaker securely onto the screw with the hole or holes. Vertical Horizontal Stand 100 mm (315/16q) Fitting speaker stands (optional) [HT900] (Center speaker only) [HT700] [HT690] Preparation Remove the stand ([HT900] only). Ensure the stands meet these conditions before purchasing them. ≥Observe the diameter and length of the screws and the distance between screws as shown in the diagram. ≥The stands must be able to support over 10 kg (22 lb.). ≥The stands must be stable even if the speakers are in a high position. Notes on speaker use ≥You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods. ≥Reduce the volume in the following cases to avoid damage. -When playing distorted sound. -When the speakers are receiving howling from a record player, noise from FM broadcasts, or continuous signals from an oscillator, test disc, or electronic instrument. -When adjusting the sound quality. -When turning the unit on or off. If irregular coloring occurs on your television These speakers are designed to be used close to a television, but the picture may be affected with some televisions and setup combinations. If this occurs, turn the television off for about 30 minutes. The television's demagnetizing function should correct the problem. If it persists, move the speakers further away from the television. 5 mm (13/64q), pitch 0.8 mm (1/32q) 60 mm (223/64q) Attach the stands Plate thickness plus 7 to with these holes. 10 mm (plus 9/32q to 25/64q) Speaker stand (not included) Caution ≥Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. ≥Do not attempt to attach these speakers to walls using methods other than those described in this manual. RQT6750 11