Panasonic SAHT820V SAHT820V User Guide - Page 13

For better video from DVD The following connections are for video from the DVD section only. Make sure you have connected the VIDEO OUT terminal with the television to view video from the VHS section (➜ page 12). You may need to change the video-input mode on the television to view video from the VHS and DVD sections. Read your television's operating instructions for details. ∫ Connecting a television with COMPONENT VIDEO terminals RF IN RF OUT 75 LOOP ANT LOOP GND EXT A DVD Y FM ANT PB/CB AM PR/CR ANT DVD/ VCR VIDEO OUT EXT VIDEO IN L R COMPONENT S-VIDEO LINE VIDEO OUT OUT OUT LINE IN COMPONENT VIDEO OUT terminal These terminals can be used for either interlace or progressive output and provide a purer picture than the S-VIDEO OUT terminal. Connection using these terminals outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors. ≥The description of the component video input terminals depends on the television or monitor (e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of the same color. ≥After making this connection, change the black level for a better picture (➜ page 28, Video-Black Level Control). To television (➜ page 12) Video cables (not included) Television (not included) Y PB PR COMPONENT VIDEO IN To enjoy progressive video ≥Connect to the component video input terminals on a 480P compatible television. (Video will not be displayed correctly if connected to an incompatible television.) ≥All televisions manufactured by Panasonic and that have 480P input connectors are compatible. Consult the manufacturer if you have another brand of television. ∫ Connecting a television with an S-VIDEO IN terminal RF IN RF OUT 75 LOOP ANT LOOP GND EXT A DVD Y FM ANT PB/CB AM PR/CR ANT DVD/ VCR VIDEO OUT EXT VIDEO IN L R COMPONENT S-VIDEO LINE VIDEO OUT OUT OUT LINE IN S-VIDEO OUT terminal The S-video terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance (C) and luminance (Y) signals. (Actual results depend on the television.) [Note] Connect to a different terminal group than that you used for the video cable (e.g., "VIDEO 2"). Picture from this unit's VHS will not appear when you use the same group input terminal connections because the S-video terminal input takes precedence. To television (➜ page 12) S-video cable (not included) Television (not included) S VIDEO IN RQT7388 13