Panasonic SAHT820V SAHT820V User Guide - Page 40

VHS Changing settings OPTION 1 While VHS MENU is displayed (➜ page 38) Press [3 4] to select the "OPTION" and press [ENTER]. 2 Press [3 4] to select the item and press [2 1] to change the setting (➜ below). OPTION OSD ≥ON TAPE SELECT ≥T120 T160 BLUE BACK ≥ON JET NAVIGATOR ON DELETE NAVIDATA ≥NO 1/2 OFF T180 OFF ≥OFF YES JET SEARCH x27 ≥x35 SELECT :4 3 s/r:2 1 END :MENU OPTION MTS ≥MAIN SAP REMOCON CODE DISPLAY BRIGHT ≥DIM 2/2 MONO ≥1 2 OFF SELECT :4 3 s/r:2 1 END :MENU To exit the settings screen Press [MENU] until the screen disappears. REMOTE CONTROL Panasonic video cassette recorders use the same remote control system so they may respond unintentionally to a command from this remote control. Change the code on this unit and its remote control (the two must match) if you place another Panasonic video cassette recorder close together. ≥Use "1", the factory preset, under normal circumstances. 1 While OPTION menu is displayed Press [3 4] to select the "REMOTE CONTROL" and press [ENTER]. 2 Press [2 1] to select the code (1 or 2) and press [ENTER]. The remote control code on the unit has been set. 3 While pressing [ENTER] on the remote control, press and hold the numbered button ([1] or [2]) corresponding to the code you selected in step 2. The remote control code on the remote control has been set. The following is displayed when you use a remote control with the different code. The unit's remote control code Change its code to match the unit's (➜ step 3). Items OSD (➜ page 41, On-screen display) TAPE SELECT Set the length of tape you are using so the unit can show the correct remaining time. BLUE BACK JET NAVIGATOR (➜ page 36) DELETE NAVIDATA Delete all the Navigation data registered in the unit. See page 36 to delete data on a single tape. JET SEARCH (➜ page 30) Set the speed for JET SEARCH when playing EP and VP tapes. MTS (➜ page 41, Changing audio) Set the MTS (Multi-channel Television Sound Stereo) reception type. REMOTE CONTROL DISPLAY Set the brightness of the unit's display when the unit is in standby mode. Settings (Underlined items are the factory preset.) ON: Messages appear on the television for about five seconds after you perform operations. OFF: Messages do not appear. T120: T30, T60, T90, T120 tapes T160: T140, T160 tapes T180: T180 tapes ON: OFF The screen shows a blue background when you play unrecorded portions. ON: Jet Navigator data automatically registered. OFF: Data not registered. NO YES: Then press [ENTER] when you want to delete all the Jet navigator data. a27 a35 Select a27 if the picture is poor at a35. MAIN: To receive stereo broadcasts. SAP: To receive SAP when being broadcast. MONO: To receive monaural broadcasts (e.g., when reception is poor). 1 2 BRIGHT: The display is bright all the time. DIM: The display dims when the unit is in standby mode. OFF: The display turns off when the unit is in standby mode. RQT7388 40