Panasonic SAHTB10 SAHTB10 User Guide - Page 10

Connections Turn off all equipment before connection and read the appropriate operating instructions. Do not connect the AC power supply cord until all other connections are complete. Compatible with FULL HD 3D TV and Blu-ray Player ≥ This unit can pass through the 3D signal from a 3D compatible Blu-ray Player to a FULL HD 3D TV. Connection to a TV ∫ HDMI The HDMI connection supports VIERA Link "HDAVI Control" (> 14) when used with a compatible Panasonic TV. ≥ Use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use Panasonic's HDMI cable. Recommended part number: RP-CDHS15 (1.5 m/4.9 ft), RP-CDHS30 (3.0 m/ 9.8 ft), RP-CDHS50 (5.0 m/16.4 ft), etc. ≥ Non-HDMI-compliant cables cannot be utilized. ∫ OPTICAL IN Connect the optical digital audio cable if the TV is not ARC compatible (> below). Basic connection (with an ARC compatible TV) ARC (Audio Return Channel) (Available only when using an ARC compatible TV) With this function it is possible to receive the digital audio signal from the TV without connecting any other audio cable. ≥ Refer to the operating instructions of the TV for the settings to output digital audio. Basic connection (with an optical digital audio cable compatible TV) TV AV IN OPTICAL OUT TV  AV IN (ARC)  HDMI AV OUT  OPTICAL DIGITAL AUDIO IN  HDMI AV OUT (ARC) A HDMI cable (not supplied) B Optical digital audio cable (not supplied) A HDMI cable (not supplied) § Be sure to connect to the TV's ARC compatible terminal. (Refer to the operating instructions for the TV.) ≥ When connected to an ARC compatible TV, set "TV Audio" to "ARC Off" to output the audio signal from the optical digital audio cable. (> 17, "TV Audio") 10 ≥ If the connected TV is ARC compatible, but audio is not output to this unit, connect using the optical digital audio cable. (> right, "Basic connection (with an optical digital audio cable compatible TV)")