Panasonic SAPM313 SAPM31 User Guide - Page 13

Sound adjustment • Play timer and record timer cannot be used together. • The play timer will start at the preset time with volume increasing gradually to preset level. • The record timer will start 30 seconds before the set time with the volume muted. • The timer comes on at the set time everyday if the timer is on. • The unit must be in the standby mode for the timer to function. • If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated. • If AUX is selected as the source, when the timer comes on, the system turns on and engages AUX as the source. If you want to playback or record from a connected unit, set the other unit's timer to the same time. (See the other unit's instruction manual.) 33/5.$%1 "!3342%",% 3522/5.$ 02%3%4%1 External unit Selecting sound effects !58 Connecting external unit Preparation: • Make sure that the power supply for all components has been turned off before making any connections. • For details, refer to the operating instructions of the unit which is to be connected. • All peripheral components and cables sold separately. Connecting analog equipment This example shows how to connect an analog player with a PHONO OUT/LINE OUT switch. When units other than those described are to be connected, please consult your dealer. (L) (R) You can change the sound effect by selecting Super Sound EQ, Preset EQ or adjusting the bass or treble effect. Super sound EQ Provide you with clearer bass and treble effects. To activate Press [S.SOUND EQ] to display "S.SOUND EQ" indicator. To cancel Press [S.SOUND EQ] again to clear "S.SOUND EQ" indicator. Preset EQ Press [PRESET EQ] repeatedly to select your desired setting. HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF Setting HEAVY CLEAR SOFT VOCAL EQ-OFF Effect Adds punch to rock Clarifies higher frequencies For background music Adds gloss to vocal No effect "LINE OUT" position Analog player (not included) AUX R L Rear panel of this unit • An analog player with a built-in phono equalizer can be connected. • Set the switch to the "LINE OUT" position at the back of the analog player. Playing or recording from an external unit 1 Press [AUX]. 2 For listening: Proceed to step 3. For recording: Press [¶/8 REC] to start recording. 3 Start playback from the external source. (For details, refer to the external unit's instruction manual.) Bass or treble Enable you to enjoy the lower or higher pitch sound. 1 Press [BASS/TREBLE] repeatedly to select your desired setting. Setting Effect BASS For lower pitch sound TREBLE For higher pitch sound 2 Press [∞] or [5] to adjust the level. The tone level can be varied within -3 to +3. Enjoying surround sound Enable you to add natural width and depth to the stereo sound. To activate Press [SURROUND] to display " " indicator. To cancel Press [SURROUND] again to clear " " indicator. • Surround sound is less discernible when listening through headphones. • If interference in FM stereo reception increases, cancel the surround sound effect. 13 RQT7923