Panasonic SAPM313 SAPM31 User Guide - Page 5
Step 2
View all Panasonic SAPM313 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Step 2 - Inserting batteries into the remote control !! 2 ,2 Step 3 - DEMO function ■ Batteries • Insert so the poles (+ and -) match those in the remote control. • Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. • Do not use rechargeable type batteries. • Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. Do not: • mix old and new batteries. • use different types at the same time. • heat or expose to flame. • take apart or short circuit. • attempt to recharge alkaline or manganese batteries. • use batteries if the covering has been peeled off. ■ Use • Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7m (23 feet) directly in front of the unit Refer to page 6 for the remote control sensor position. When the unit is first plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting "DEMO ON". Press and hold [STOP 7, -DEMO]. The display change each time the button is held down. DEMO OFF DEMO ON While in standby mode, select "DEMO OFF" to reduce power consumption. Placement of speakers SC-PM31 is used in the illustrations unless otherwise mentioned. Speakers are designed identically so that no left or right channel orientation is necessary. • These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. • To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off. Note • Keep your speakers at least 10mm (13/32")away from the system for proper ventilation. Use only the supplied speakers. • The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected. Caution • Use the speakers only with the recommended system. Failure to do so can damage the amplifier and speakers, and can cause fire. Consult a qualified service person if damage occurs or if a sudden change in performance is apparent. • Do not attach these speakers to walls or ceilings. 5 RQT7923