Panasonic SAPT480 SAPT480 User Guide - Page 17

Getting Started Playing Discs AUDIO menu Select to suit the type of equipment you connected to the HDMI AV OUT terminal. Select "BITSTREAM" when the equipment can decode the bitstream (digital form of 5.1-channel data). Otherwise, select "PCM". (If the bitstream is output to the equipment without a decoder, high levels of noise can be output and may damage your speakers and hearing.) DOLBY DIGITAL§ ≥BITSTREAM ≥PCM DTS§ ≥BITSTREAM ≥PCM § When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend on the performance of this connected equipment. DYNAMIC RANGE ≥ ON: Adjusts for clarity even when the volume is low. Convenient for late night viewing. (Only works with Dolby Digital) ≥ OFF SPEAKER SETTINGS Select the delay time of the speakers. (Center and surround speakers only) For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center or surround speakers closer to the seating position, adjust the delay time to make up for the difference. L SW C C R   : Actual speaker position : Ideal speaker position Primary listening distance LS RS Approximate room dimensions LS RS Circle of constant primary listening distance If either distance a or b is less than c, find the difference in the table and change to the recommended setting. a Center speaker b Surround speaker Difference (Approx.) Setting Difference (Approx.) Setting 30 cm (1 foot) 1ms 150 cm (5 feet) 5ms 60 cm (2 feet) 2ms 300 cm (10 feet) 10ms 90 cm (3 feet) 3ms 450 cm (15 feet) 15ms 120 cm (4 feet) 4ms 150 cm (5 feet) 5ms ≥ SETTINGS: ≥ C DELAY (Center Delay): 0ms, 1ms, 2ms, 3ms, 4ms, 5ms Select the delay time for your center speaker. ≥ LS/RS DELAY (Left Surround/Right Surround Delay): 0ms, 5ms, 10ms, 15ms Select the delay time for your surround speakers. ≥ TEST TONE: SETTING Use the test tone for speaker level adjustments (B 10, Adjusting the speaker output level manually). AUDIO OUT ≥ ON: When audio output is from the HDMI AV OUT terminal. (Depending on the capabilities of the connected equipment, audio output may differ from the audio settings of the main unit.) ≥ OFF: When audio output is not from the HDMI AV OUT terminal. (The audio is output using the settings of the main unit.) RGB RANGE This works only when "COLOR SPACE" in Menu 4 (HDMI) is set to RGB (B 13). ≥ STANDARD ≥ ENHANCED: When the black and white images are not distinct. VIERA Link ≥ ON: The VIERA Link "HDAVI Control" function is available (B 14). ≥ OFF POWER OFF LINK Select the desired power off link setting of this unit for VIERA Link operation (B 14). (This works depending on the settings of the connected VIERA Link "HDAVI Control" compatible equipment.) ≥ VIDEO/AUDIO: When the TV is turned off, this unit will turn off automatically. ≥ VIDEO: When the TV is turned off, this unit will turn off except during the following conditions: - audio playback ([CD] [MP3] [WMA]) - iPod mode - radio mode - "AUX", "ARC" or "D-IN" mode (non-selected TV audio setting for VIERA Link) TV AUDIO Select the TV audio input to work with the VIERA Link operations (B 14). ≥ AUX ≥ ARC ≥ DIGITAL IN OTHERS menu SLIDE SHOW TIME Set the speed of the slideshow. Factory preset: 3 SEC ≥ 1 SEC to 15 SEC (in 1-unit steps) ≥ 15 SEC to 60 SEC (in 5-unit steps) ≥ 60 SEC to 180 SEC (in 30-unit steps) FL DIMMER Change the brightness of the unit's display. ≥ BRIGHT ≥ DIM: The display is dimmed. ≥ AUTO: The display is dimmed, but brightens when you perform some operations. FL CONTROL ≥ ON (VOL 0): The unit's display will turn off when the volume is adjusted to "0". ≥ OFF Other Operations Reference DISPLAY menu LANGUAGE Choose the language for the on-screen messages. ≥ ENGLISH ≥ FRANÇAIS ≥ ESPAÑOL HDMI menu EASY SETUP ≥ SET (B 8) DVD-VR/DATA Select to play only DVD-VR or DATA format. ≥ DVD-VR: To play the video programs on DVD-R/-RW. ≥ DATA: To play the data files on DVD-R/-RW. VIDEO PRIORITY ≥ ON: When using the HDMI AV OUT terminal for video output. The resolution of the video output from the HDMI AV OUT terminal is optimized according to the capability of the connected equipment (e.g. TV). ≥ OFF: When not using the HDMI AV OUT terminal for video output. SCREEN DIMMER This is to prevent burn marks on the TV screen. ≥ OFF ≥ WAIT 5 MIN: If there is no operation for 5 minutes, the picture turns gray. The TV screen will resume when you perform some operations. (This does not work during video and picture playback.) RQTX1101 17