Panasonic SC-AP01 SCAP01 User Guide - Page 7
Method 2 - network setting
View all Panasonic SC-AP01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Method 2 If your wireless network router does not support WPS. With this method, you will access this unit's wireless network settings from the Internet browser of your compatible device. ≥ The following explanations are based on an iPhone. Preparation ≥ Turn on your iPhone. 1 Press and hold both [VOLUME i] and [- WPS] on this unit for more than 2 seconds. 4 Select "Search wireless network". 5 Select and input the details. ≥ Check your home wireless network name (Network name (SSID)) and password for this network. This can often be found on the wireless router itself. Network settings Blinks purple ≥ If the indicator blinks blue, turn the unit off and on and repeat step 1. 2 Connect your iPhone to this unit's wireless network named "Setup 1, 2 Once "Setup is selected, continue to step 3. 3 Start "Safari" on your iPhone and type "http://192.168.1.12/" into the URL address field and display the page. [1] Select your home wireless network name.*3 [2] Type the password. [3] Select "NEXT". 6 Select "JOIN" to apply the settings. {. In the pop-up screen, select "OK" to continue. - Select "CANCEL" to return to the setup window. {. The Wi-Fi® status indicator blinks blue. - You can now close the Safari browser. 7 The unit's settings are completed when the Wi-Fi® status indicator stops blinking after about 2 minutes and lights blue. If the Wi-Fi® status indicator turns off, turn the unit off and on again, check the wireless network password and other settings and start again from step 1. {. This unit's setup window is displayed. 8 Make sure to connect your iPhone back to your home wireless network.*4 9 To use AirPlay, turn to page 9. *1: " _ " stands for a digit that is unique to each set. *2: Make sure that DHCP is enabled for the network setting on the iPhone. *3: If you have set your wireless network to be invisible, select "BACK" and refer to "Alternative settings". (> 8) *4: To use the AirPlay function, connect the iPhone to the wireless network selected in step 5. (> above) 7 RQT9655