Panasonic SC-CMAX5 SC-CMAX5 Operating Manual - Page 11

Sound and illumination effects Sound effects The following sound effects can be added to the audio output. 1 Press [SOUND] repeatedly to select the sound effect. 2 Press [3, 4] to select the setting and then press [OK]. Select the desired preset EQ setting. PRESET EQ ≥ Select "FLAT" to turn preset EQ off. Using the unit Press [PRESET EQ]. BASS MID j4 to i4 TREBLE INPUT LEVEL "NORMAL" or "HIGH" (For "AUX 2" ≥ Select "NORMAL" if the sound is distorted source) during "HIGH" input level. SUPER WOOFER "SW1", "SW2", "SW3" or "OFF" Using the unit Press [SUPER WOOFER]. "D.BASS BEAT", "D.BASS OFF" or "D.BASS ON" D.BASS Using the unit Press [D.BASS]. ≥ D.BASS BEAT: This function emphasizes the attack level of the drum beat and produces a punchy sound. Depending on the track, the effect may be small. Clock and Timers Setting the clock This is a 12-hour clock. 1 Press [SETUP] repeatedly to select "CLOCK". 2 Press [3, 4] to set the time and then press [OK]. ≥ To check the time, press [SETUP] repeatedly to select "CLOCK" and then press [OK] once. (During standby, press [DISPLAY] once.) ≥ The clock is reset when there is a power failure or when the AC power supply cord is removed. ≥ Reset the clock regularly to maintain accuracy. Sleep timer The sleep timer can turn the unit off after a set time. Press [SLEEP] to set the time (in minutes). SLEEP 30 --. SLEEP 60 --. SLEEP 90 --. SLEEP120 OFF (Cancel b ≥ To confirm the remaining time, press [SLEEP] once. ≥ The play timer and sleep timer can be used together. The sleep timer is always the main timer on the unit. ≥ You may experience a reduction in sound quality when these effects are used with some sources. If this occurs, turn the sound effects off. Illumination settings By the unit only You can change the illumination color on the unit. Turn [ILLUMINATION/CONTROL]. To cancel, select "OFF". 11 (ENG) RQT0A53