Panasonic SC-HTB880 SC-HTB880 Owner's Manual (English) - Page 15

Attach the cord to the main unit.

Page 15 highlights

When placing the main unit on a rack or on a table Additionally required accessories (commercially available) ≥Fall prevention cord ...k 2 ≥Screw eyes (to attach the fall prevention cord k 2 ≥ Use commercially available screws that are capable of supporting over 33 kg (72.8 lbs). ≥ Use a cord that is capable of supporting over 33 kg (72.8 lbs) (with a diameter of about 1.5 mm (1/16q)). Attach the cord to the main unit.  Precautions Getting started  A Cord§ § If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 5 mm (3/16q) apart from the tip, at an angle of 45o (as illustrated above). Place the main unit in the desired position and attach each cord onto the rack or table. ≥ Make sure that the slack of the cord is minimal. ≥ Do not lean the main unit against the TV or wall.  B Screw eye ≥Attach at a position capable of supporting over 33 kg (72.8 lbs). ≥Depending on the placement of the main unit, the screwing position of the screw eye may differ. 15 RQT9903

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

Getting started
Precautions
RQT9903
15
Additionally required accessories (commercially available)
Fall prevention cord
......................................................................................................................
k
2
Screw eyes (to attach the fall prevention cord)
.............................................................................
k
2
±
Use commercially available screws that are capable of supporting over 33 k
g
(72.8 lbs).
Use a cord that is capable of supporting over 33 k
g
(72.8 lbs) (with a diameter of about 1.5 mm (
1
/
16
q
)).
Attach the cord to the main unit.
A
Cord
§
§
If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 5 mm (
3
/
16
q
) apart from the tip, at an angle of 45
o
(as
illustrated above).
Place the main unit in the desired position and attach each cord onto the
rack or table.
Make sure that the slack of the cord is minimal.
Do not lean the main unit against the TV or wall.
B
Screw eye
Attach at a position capable of supporting over 33 k
g
(72.8 lbs).
Depending on the placement of the main unit, the screwing position of the screw eye may differ.
When placing the main unit on a rack or on a table