Panasonic SC-HTE180 Owners Manual - Page 16

Specifications █ Amplifier section RMS output power: Dolby Digital mode Front Ch 30 W per channel (6 Ω), 1 kHz, 10% THD Subwoofer Ch 60 W per channel (3 Ω), 100 Hz, 10% THD Total RMS Dolby Digital mode power 120 W FTC output power: Dolby Digital mode Front Ch 16 W per channel (6 Ω), 170 Hz to 20 kHz, 1% THD Subwoofer Ch 28 W per channel (3 Ω), 45 Hz to 170 Hz, 1% THD Total FTC Dolby Digital mode power 60 W █ Terminals section HDAVI Control This unit supports "HDAVI Control 5" function HDMI AV input Input connector Type A (19 pin) HDMI AV output Output connector Type A (19 pin) Digital audio input Optical digital input Optical terminal Sampling frequency 32 kHz, 44.1 kHz, 48 kHz 88.2 kHz, 96 kHz (only LPCM) Audio format Dolby Digital, DTS Digital Surround, LPCM Analog audio input Audio input Pin jack (1 system) USB port For service use only █ Bluetooth® section Version Class Supported profiles Operating frequency Operation distance Supported codec Bluetooth® Ver. 3.0 Class 2 A2DP 2.4 GHz band FH-SS 10 m (33 ft) line of sight SBC █ Speaker section Front speaker (built-in) Type 1 way, 1 speaker system (bass reflex) Speaker unit(s) Full range 3.8 cm x 9 cm (1½″ x 3½″) cone type x 2 Subwoofer (built-in) Type 1 way, 2 speaker system (bass reflex) Speaker unit(s) Woofer 8 cm (3 ″) cone type x 2 █ General Power supply AC 120 V, 60 Hz Power consumption 27 W Dimensions (W x H x D) 700 mm x 60 mm x 365 mm (27 ″ x 2 ″ x 14 ″) Mass 4.5 kg (9.9 lbs) Maximum loading weight 50.0 kg (110.2 lbs) Operating temperature range 0°C to +40°C (+32°F to +104°F) Operating humidity range 20% to 80% RH (no condensation) Power consumption in standby mode (With "BLUETOOTH STANDBY" set to "OFF") 0.2 W (approximate) Note: • Specifications are subject to change without notice. Mass (weight) and dimensions are approximate. • Total harmonic distortion is measured by the digital spectrum analyzer. RQT9964 16