Panasonic SC-PM250 Owners Manual - Page 11

ENGLISH Sleep timer The sleep timer switches off the system after the set time. 1 Press [SETUP] to select "SLEEP". 2 Press [R, T] to select the setting (in minutes) and then press [OK]. To cancel, select "OFF". Note: • The remaining time is always shown on the display. The display changes temporarily when you perform other operations. • The sleep timer can be used together with the play timer. • The sleep timer always comes first. Be sure not to set an overlap of timers. Sound effects 1 Press [SOUND] repeatedly to select the sound effect. 2 Press [R, T] to select the setting and then press [OK]. PRESET EQ "HEAVY" (default), "SOFT", "CLEAR", "VOCAL" or "FLAT" BASS -4 to +4 (default: 0) Using the main unit 1. Press [BASS]. 2. Press [2/3] or [5/6]. TREBLE -4 to +4 (default: 0) Using the main unit 1. Press [TREBLE]. 2. Press [2/3] or [5/6]. D.BASS "ON D.BASS" (default) or "OFF D.BASS" SURROUND "ON SURROUND" or "OFF SURROUND" (default) Others Auto off This system automatically switches off when you do not use it for 20 minutes. 1 Press [SETUP] repeatedly to select "AUTO OFF". 2 Press [R, T] to select "ON" and then press [OK]. To cancel, select "OFF". Note: This function does not work when you are in radio source or when a Bluetooth® device is connected. Bluetooth® standby This function automatically switches on the system when you establish a Bluetooth® connection from a paired device. 1 Press [SETUP] repeatedly to select "BLUETOOTH STANDBY". 2 Press [R, T] to select "ON" and then press [OK]. To cancel, select "OFF". Checking the software version 1 Press [SETUP] repeatedly to select "SW VER." and then press [OK]. The software version is shown. 2 Press [OK] again to exit. RQT0A12 11