Panasonic SC-PM500 Owners Manual - Page 12

ENGLISH Sound effects Changing the sound quality 1 Press [SOUND] to select a sound effect. 2 Within 3 seconds, press [Y, U] to select the desired setting. BASS TREBLE -4 to +4 SURROUND "ON SURROUND" or "OFF SURROUND" By main unit only 1 Press [BASS/TREBLE] to select "BASS" or "TREBLE". 2 Press [2/3] or [5/6] to adjust the level. Preset EQ Press [PRESET EQ] to select a setting. HEAVY SOFT CLEAR VOCAL FLAT Adds punch to rock For background music Clarifies higher frequencies Adds gloss to vocal Cancels the sound effect RQT9539 D.BASS This function lets you enjoy a powerful bass effect. Press [D.BASS] to select "ON D.BASS" or "OFF D.BASS". 12 12 External equipment USB You can connect and play MP3 tracks from your USB mass storage device. Do not use a USB extension cable. The system cannot recognize USB mass storage device connected through a cable. 1 Decrease the volume and connect the USB mass storage device to the USB port. 2 Press [RADIO, EXT-IN] (main unit: [RADIO/EXT-IN(USB)]) to select "USB" and then press [4/9] to start playback. Stop playback Press [8] during playback. "RESUME" is shown. Press [4/9] to continue playback from the start of the track. OR Press [8] two times to stop the playback fully. For other operations, refer to "Discs" (Z 8). Compatible devices • USB mass storage devices that support bulk-only transfer. • USB mass storage devices that support USB 2.0 full speed. Supported format • Folders are defined as album. • Files are defined as track. • Track must have the extension ".mp3" or ".MP3". • CBI (Control/Bulk/Interrupt) is not supported. • NTFS file system is not supported (only FAT 12/16/32 file system is supported). • Some files can fail to work because of the sector size. Note: • Maximum album: 255 albums (including root folder) • Maximum track: 2500 tracks • Maximum track in one album: 999 tracks Connecting to headphones Connect the headphones to the headphones jack. Plug type: Ø 3.5 mm (1/8″) stereo (not included) • Avoid listening for prolonged periods of time to prevent hearing damage. • Excessive sound pressure from earphones and headphones can cause hearing loss. • Listening at full volume for long periods may damage the user's ears. Be sure to use the supplied or recommended headphones or earphones. Remote control code When other Panasonic equipment responds to the remote control of this system, change the remote control code for this system. To set the code to "REMOTE 2" 1 Press and hold [CD] on the main unit and [2] on the remote control until "REMOTE 2" is shown. 2 Press and hold [OK] and [2] for a minimum of 4 seconds. To set the code to "REMOTE 1" 1 Press and hold [CD] on the main unit and [1] on the remote control until "REMOTE 1" is shown. 2 Press and hold [OK] and [1] for a minimum of 4 seconds. PM500_PC1_1us.indd 12 7/14/2011 12:13:03 PM