Panasonic SC-PMX100 Owners Manual - Page 18
Bluetooth, Network
![]() |
View all Panasonic SC-PMX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
RQT9991 USB The USB device or the contents in it cannot be read. • The format of the USB device or the contents in it is/ are not compatible with the system. Slow operation of the USB device. • Large content size or large memory USB device takes longer time to read. The elapsed time shown is different from the actual play time. • Transfer the data to another USB device or backup the data and reformat the USB device. Bluetooth® Pairing cannot be done. • Check the Bluetooth® device condition. The device cannot be connected. • The pairing of the device was unsuccessful or the registration has been replaced. Try pairing the device again. • This system might be connected to a different device. Disconnect the other device and try pairing the device again. • If the problem persists, turn the unit off and on, then try again. The device is connected but audio cannot be heard through this system. • For some built-in Bluetooth® devices, you have to set the audio output to "SC-PMX100" manually. Read the operating instructions for the device for details. The sound is interrupted. • The device is out of the 10 m (33 ft) communication range. Bring the Bluetooth® device closer to this system. • Remove any obstacle between this system and the device. • Other devices that use the 2.4 GHz frequency band (wireless router, microwaves, cordless phones, etc.) are interfering. Bring the Bluetooth® device closer to this system and distance it from the other devices. • Select "Mode 1" for stable communication. (> 11) The One-Touch Connection (NFC feature) is not working. • Make sure the unit and the NFC feature of the device are turned on. (> 11) 18 PC The PC does not recognize this system. • Check your operating environment. (> 14) • Restart the PC, turn off and on this system, and then reconnect the USB cable. • Use another USB port of the connected PC. • Install the dedicated driver if using a PC with Windows. Cannot find music files stored on the PC. • When you playback music files over a network, those that are not registered to its network server are not displayed. For details, refer to the operating instructions for your server. (> 20) Network Cannot connect to the network. • Confirm the network connection and settings. (> 6) • If the network is set to be invisible, make the network visible while you set up the network for this unit or make a wired LAN connection. (> 8) • This system's Wi-Fi security supports WPA2™ only. Your wireless router must therefore be WPA2™ compatible. For details on the security supported by your router and how to change the settings, please refer to the operating instructions or contact your Internet service provider. • Make sure that the multicast function on the wireless router is enabled. • Depending on the routers, WPS button may not work. Try other methods. (> 6) • Check the "Wireless LAN" setting. (> 16) Cannot select this system as the output speakers. • Make sure that the devices are connected to the same network as this system. • Reconnect the devices to the network. • Turn the wireless router off and then on. • Turn this system off and on, and then select this system as the output speakers again. Playback does not start. The sound is interrupted. • Adjust the orientation of the wireless LAN antenna on the rear of the main unit. • Try to place the speakers further away from the main unit. • If using the 2.4 GHz band on the wireless router, simultaneous use with other 2.4 GHz devices, such as microwaves, cordless telephones, etc., may result in connection interruptions. Increase the distance between this unit and these devices. - If your wireless router supports 5 GHz band, try using the 5 GHz band. To change to the 5 GHz band, redo the network settings using an Internet browser (> 6). On the step 9, make sure to select your network name (SSID) for the 5 GHz band. • Do not place this system inside a metal cabinet, for it might block the Wi-Fi signal. • Place this system closer to the wireless router. • If several wireless devices are simultaneously using the same wireless network as this system, try turning off the other devices or reducing their wireless network usage. • If the playback stops, check the playback status on the device. • Reconnect the devices to the network. • Turn the wireless router off and then on. • With some iOS and iTunes versions, it may not be possible to restart the AirPlay playback if the selector is changed (e.g., "CD") or this system is turned off, during the AirPlay playback. In this case, select a different device from the AirPlay icon of the Music App or iTunes and then re-select this system as the output speakers. (> 10) • Try a wired LAN connection. (> 8).
![](/manual_guide/products/panasonic-scpmx100-owners-manual-4a6d1fb/18.png)