Panasonic SC-PMX70 Owners Manual - Page 10

Setting the clock, Sleep timer, Play timer, Changing the sound quality, Preset EQ, D.BASS

Page 10 highlights

Clock and timers Setting the clock This is a 12-hour clock. 1 Press [CLOCK/TIMER] to select "CLOCK". 2 Press [3, 4] to set the time and then press [OK]. To check the time Press [CLOCK/TIMER]. Note: • Reset the clock regularly to maintain accuracy. Sleep timer The sleep timer switches off the system after the set time. Press [SLEEP] repeatedly to select the setting (in minutes). "SLEEP 30" -. "SLEEP 60" -. "SLEEP 90" -. "SLEEP 120 OFF" (Cancel b Note: • The remaining time is indicated on the unit's display except when other operations are performed. • The sleep timer can be used together with the play timer. • The sleep timer always comes first. Be sure not to set an overlap of timers. Play timer You can set the timer to come on at a certain time to wake you up. Preparation Set the clock. 1 Press [CLOCK/TIMER] repeatedly to select "TIMER ADJ". 2 Press [3, 4] to set the starting time ("ON TIME") and then press [OK]. 3 Press [3, 4] to set the finishing time ("OFF TIME") and then press [OK]. 4 Press [3, 4] to select the music source*1 and then press [OK]. Turning the timer on 1 Prepare the selected music source and set the desired volume. 2 Press [F, PLAY]. "F" is shown. To cancel, press [F, PLAY] again. The system must be switched off for the timer to operate. To check the settings Press [CLOCK/TIMER] repeatedly to select "TIMER ADJ". (During standby, press [CLOCK/TIMER] twice.) Note: • The timer starts at a low volume and increases gradually to the preset level. • The timer comes on at the set time every day if the timer is on. • If you switch off the system and switch on again while a timer is in operation, the timer will not stop at the end time. *1: "CD", "USB", and "FM" can be set as the music source. • For timer music source through the port for iPhone/ iPad/iPod and USB devices, select "USB". Sound effects Changing the sound quality 1 Press [SOUND] repeatedly to select a sound effect. 2 Press [2, 1] to select the desired setting. BASS TREBLE SURROUND -4 to +4 "ON SURROUND" or "OFF SURROUND" By main unit only Turn [BASS] or [TREBLE] to adjust the level. Preset EQ Press [PRESET EQ] repeatedly to select a setting. HEAVY SOFT CLEAR VOCAL FLAT Adds punch to rock For background music Clarifies higher frequencies Adds gloss to vocal Cancels the sound effect D.BASS This function lets you enjoy a powerful bass effect. Press [D.BASS] to select "ON D.BASS" or "OFF D.BASS". Using the auxiliary input You can connect a VCR, DVD player etc. and listen to the audio through this system. Preparation Connect the external equipment. 1 Press [RADIO, EXT-IN] repeatedly to select "AUX". 2 Play the external equipment. RQT9989 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

RQT9989
10
Clock and timers
This is a 12-hour clock.
1
Press [CLOCK/TIMER] to select “CLOCK”.
2
Press [
3
,
4
] to set the time and then press [OK].
To check the time
Press [CLOCK/TIMER].
Note:
Reset the clock regularly to maintain accuracy.
The sleep timer switches off the system after the set
time.
Press [SLEEP] repeatedly to select the setting (in
minutes).
Note:
The remaining time is indicated on the unit’s display except
when other operations are performed.
The sleep timer can be used together with the play timer.
The sleep timer always comes first. Be sure not to set an
overlap of timers.
You can set the timer to come on at a certain time to
wake you up.
Preparation
Set the clock.
1
Press [CLOCK/TIMER] repeatedly to select
“TIMER ADJ”.
2
Press [
3
,
4
] to set the starting time (“ON TIME”)
and then press [OK].
3
Press [
3
,
4
] to set the finishing time
(“OFF TIME”) and then press [OK].
4
Press [
3
,
4
] to select the music source*
1
and
then press [OK].
Turning the timer on
1
Prepare the selected music source and set the
desired volume.
2
Press [
F
,
PLAY].
F
” is shown.
To cancel, press [
F
,
PLAY] again.
The system must be switched off for the timer to
operate.
To check the settings
Press [CLOCK/TIMER] repeatedly to select “TIMER
ADJ”.
(During standby, press [CLOCK/TIMER] twice.)
Note:
The timer starts at a low volume and increases gradually to
the preset level.
The timer comes on at the set time every day if the timer is
on.
If you switch off the system and switch on again while a
timer is in operation, the timer will not stop at the end time.
*1:
“CD”, “USB”, and “FM” can be set as the music source.
For timer music source through the port for iPhone/
iPad/iPod and USB devices, select “USB”.
Sound effects
1
Press [SOUND] repeatedly to select a sound
effect.
2
Press [
2
,
1
] to select the desired setting.
By main unit only
Turn [BASS] or [TREBLE] to adjust the level.
Press [PRESET EQ] repeatedly to select a setting.
This function lets you enjoy a powerful bass effect.
Press [D.BASS] to select “ON D.BASS” or “OFF
D.BASS”.
Using the auxiliary input
You can connect a VCR, DVD player etc. and listen to
the audio through this system.
Preparation
Connect the external equipment.
1
Press [RADIO, EXT-IN] repeatedly to select
“AUX”.
2
Play the external equipment.
Setting the clock
Sleep timer
“SLEEP 30”
-.
“SLEEP 60”
-.
“SLEEP 90”
-.
“SLEEP 120”
^-------------------
“OFF” (Cancel)
(------------------
b
Play timer
Changing the sound quality
BASS
-4 to +4
TREBLE
SURROUND
“ON SURROUND” or
“OFF SURROUND”
Preset EQ
HEAVY
Adds punch to rock
SOFT
For background music
CLEAR
Clarifies higher frequencies
VOCAL
Adds gloss to vocal
FLAT
Cancels the sound effect
D.BASS